Fine Tuner FT2 ultra fast "photo accelerant" for UV & Visible up to 420 nm SLA DLP, LCD & Inkjet 3D printers
The use of Fine Tuner FT2 is ideal for increasing the print speed while maintain good quality prints in Ultraviolet and Visible SLA, DLP, LCD & Inkjet 3D printers.
Its use is essential in low power UV & Visible SLA DLP, LCD & Inkjet 3D printers, which do not provide the option of changing neither the light power (mW/cm2) nor curing or exposure time (seconds), because speeds up the cure and fine tunes the quality of your prints.
Fine Tuner FT2 is supplied as a kit, which contains 1 dispenser (dropper) with 60 mL of FT2, 1 measuring flask to measure exactly the minimum volume of 3Dresyns needed for fine tuning (dependant on minimum required printing volumen of individual resin tanks (vats)) and 1 empty 250 mL black bottle to mix, keep and protect fine tuned 3Dresyns from day light. Please do not expose 3Dresyns to direct natural daylight or artificial room light to prevent curing.
Note: Fine Tuner FT2 is specially recommended for low power 3D printers having UV & Visible light wavelengths up to 420 nm (150-420 nm range) , including 405 nm blue & violet LEDs, lasers and standard DLP projectors and daylight visible LCDs.
Fine Tuner FT2 can become viscous at low temperature. A gentle warming (use microwave with caution) will decrease its viscosity for ease of handling.
We Also Recommend
Fine Tuner FT1, our general purpose fast "photo accelerant" for UV & Visible up to 410 nm SLA, DLP, LCD & Inkjet 3D printers
Fine Tuner FT3, very low yellowing, fast and low viscosity "photo accelerant" for UV & Visible up to 420 nm SLA, DLP, LCD & Inkjet 3D printers
Fine Tuner FT4 Bio ultra safe hydrophobic "bio photo accelerant" for UV & Visible up to 500 nm 3D printers and hydrophobic 100% Biocompatible systems
Fine Tuner FT4 Bio HP Hydro-Phillic ultra safe "bio photo accelerant" for UV & Visible up to 500 nm 3D printers and 100% Biocompatible systems