Fine Tuner FT5 Bio WS "bio accelerant" for Water Soluble UV & Visible 3D printers and 100% Biocompatible systems
- print failure, poor print resolution, print breaking, print and supports under cure , separation of prints from the supports, others
The use of Fine Tuner FT5 Bio WS is ideal for increasing the print speed of both Ultraviolet and Visible SLA, DLP & Inkjet 3D printers and specially for printing watr soluble biocompatible systems since it is an ultra safe, not cytotoxic, 100% biocompatible liquid material (without any labels/pictograms).
Its use is essential in UV/Visible 3D printers, which do not provide the option of changing neither the light power (mW/cm2) nor curing or exposure time (seconds), because speeds up the cure and fine tunes the quality of your prints. Its usage is not recommended for low power LCD printers, because of the resulting slow kinetics/long exposure times.
Fine Tuner FT5 Bio WS is supplied as a kit, which contains 50 grams of yellow liquid/solid with low melting temperature (<25C), 1 measuring flask to measure exactly the minimum volume of 3Dresyns needed for fine tuning (dependant on minimum required printing volumen of individual resin tanks (vats)) and 1 empty 250 mL black bottle to mix, keep and protect fine tuned 3Dresyns from day light. Please do not expose 3Dresyns to direct natural daylight or artificial room light to prevent curing.
The yellow color of Fine Tuner FT5 Bio WS fades or photobleaches during postcuring in the light box or naturally upon time.
Note: Fine Tuner FT5 Bio WS is specially recommended for Ultraviolet & Visible light wavelengths (200-500 nm range) , including 405 nm blue & violet LEDs, lasers and standard DLP projectors and daylight sources.
We Also Recommend
Fine Tuner FT4 Bio "bio accelerant" for UV & Visible 3D printers and 100% Biocompatible systems