Fine Tuner FT1 "accelerant" for UV & Visible SLA, DLP, LCD & Inkjet 3D printers
- print failure, poor print resolution, print breaking, print and supports under cure, separation of prints from the supports, others
The use of Fine Tuner FT1 is ideal for increasing the print speed while maintain good quality prints in Ultraviolet and Visible SLA, DLP, LCD & Inkjet 3D printers.
Its use is essential in UV & Visible SLA, DLP, LCD & Inkjet 3D printers, which do not provide the option of changing neither the light power (mW/cm2) nor curing or exposure time (seconds), because speeds up the cure and fine tunes the quality of your prints.
Fine Tuner FT1 is supplied as a kit, which contains 1 dispenser (dropper) with 60 mL of FT1, 1 measuring flask to measure exactly the minimum volume of 3Dresyns needed for fine tuning (dependant on minimum required printing volumen of individual resin tanks (vats)) and 1 empty 250 mL black bottle to mix, keep and protect fine tuned 3Dresins from day light. Please do not expose 3Dresyns to direct natural or artificial room light to prevent curing.
Note: Print Quality Fine Tuner FT1 is recommended for printers having UV/Visible light wavelengths up to 410 nm (250-410 nm range), including 405 nm blue LEDs, lasers and standard DLP projectors and LCDs. Our 60 mL dispenser of FT1 is normally used at small dosage and it is enough for fine tuning between 6-12 Litres of 3D resins.
We Also Recommend
Fine Tuner FT3 "low viscosity accelerant" for UV & Visible SLA, DLP, LCD & Inkjet 3D printers
Fine Tuner FT4 Bio "bio accelerant" for UV & Visible 3D printers and 100% Biocompatible systems
Fine Tuner FT5 Bio WS "bio accelerant" for Water Soluble UV & Visible 3D printers and 100% Biocompatible systems