• excellent dispersability and flow of post added micron and submicron ceramics
• water soluble, fast debinding in water 
• the ceramic additions can be up to 50% volume concentrations still with good flow
• very high resolution 3D printing for very high detail and resolution applications
• high print quality and speed with curing wavelengths up to 410 nm and higher upon request
• controlled and reproducible process shrinkage
• minimum expansion coefficient and wide temperature interval of debinding to prevent micro-fractures
• elongation <7%
• relative low viscosity, good flow
• very high resolution of 20 microns of final products
• low shrinkage
• printable by SLA DLP 3D printers with at least 3 mW/cm2
• increased durability of the resin tank
• organo-tin free
• used in combination with our Adhesive Primer 3Dresyn AP1 for promoting adhesion on the build platform

* Our 3Dresyns have been designed to print in a broad range of printer settings. Nevertheless, our Print Quality Fine Tuner FT1 is recommended to fine tune our 3Dresyns to your specific printer settings, including faster or slower curing or exposure time and lower or higher layer thickness. For more info click here.