3Dresyn AgSEK1 is soluble or swellable electrically conductive silver based 3D resin for 3D printing high conductivity materials for electronics e.g. antennas for IoT applications (HF, UHF), RFID and NFC tags, OLED, OPVs, flexible PCBs, flexible cables, etc...
It is an alcohol/water soluble/swellable 3D resin, which has these features:
- Sheet resistance: >0.44 Ohm/square
- Resistivity: >8 micro Ohm.m
- Conductivity: <200 kS/m
Features of 3Dresyn AgSEK1 part2*:
- water soluble or swellable photoreactive printable conductive 3D resin
- Shore hardness D80-90
- tack free finishes after light box postcuring
- tensile strength <40 MPa
- Young modulus 2000-3000 MPa
- flexural strength <30 MPA
- elongation <3%
- printable at thin z layers of 10 microns in high power SLA, DLP printers
*Note: 3Dresyn AgSEK1 is supplied in 3 parts:
- part 1 contains 65% by weight of the silver powder: 3D-ADD AgEK1 part 1
- part 2 contains 35% by weight of the 3D resin: 3Dresyn SEK part 2
- part 3 contains 2.5% of Fine Tuner FT1
Mixing procedure. Add part 1 slowly to part 2 under stirring with a Conn blade rotary mixer (avoid excessive energy to prevent excessive foaming and gelation). Alternatively, a vortex mixer can also be used. Once the mixture is properly dispersed add Part 3 and mixed well.
IMPORTANT: The product once mixed has a short shelf life, specially if kept at >40-50ºC. If stored in a fridge its shelf life can be extended longer. It is recommended that the product is printed after its mixing to avoid any premature gelation.
After placing your order request our more detailed Instructions for Use "IFU" for your specific SLA, DLP & LCD printer technology: info@3dresyns.com
For more info read: Instructions for Use IFU for conductivity resin systems
*Note: low power printers may exhibit printability limitations at high Z layers. In such cases reduce Z layer thickness and increase exposure times accordingly following our Instructions for Use IFU.
