3D Adhesive HFA1 Bio, Hard & Flexible Adhesive has these features and benefits:
- ideal for gluing 3D printed parts to plastics and metals
- photoreactive durable adhesive
- foldable at 1-2 mm witohut breaking
- cures in seconds under sunlight or in any standard light box at high thickness (from 0.1 to 1 cm)
- supplied in clear or in several gingiva colors
- semi hard Shore D60
- Tensile strength <30 MPa
- Flexural strength <30 MPa
- flexible (Young modulus 800-1500 MPa)
- high impact and shattering resistance (Notched Izod <90 J/m)
- elongation <30%
- excellent resistance to boiling water
- good impact and shattering resistance
- synthetic resin source
- 100% biocompatible
- ultra pure and safe, non cytotoxic
- provides excellent and durable bonding
- organo-tin free
- 100% pass in the cytoxicity test
-
water solubility: ≤ 1,6 µg/mm3
-
hydrophobic, ultra low water sorption ULWA≤ 32 µg/mm3
-
residual monomer <0%
- fully compliant with the Quality requirements of ISO 20795-1 and ISO 10993-1
Note: Apply several drops of 3D adhesive on the denture base. After locating the teeth on the denture base photo cure it in a light box for 5-10 minutes until the adhesive is fully cured and the teeth are fully bound to the denture base
