Standard photopolymer Inkjet resins for General Purpose applications
The key advantages of our Standard Inkjet 3Dresyns is increased toughness without breaking of even extra hard grades (Shore D90), which normally suffer from significant brittleness.
Our Standard Inkjet 3Dresyns are ideal not only for modeling and prototyping but also for making high performance functional materials. They provide superior mechanical properties than conventional thermoplastics such as ABS, PP, etc,..
Benefits of the Standard Inkjet 3Dresyns product range:
excellent value for money
excellent range of 3D resins for modelling, prototyping and printing functional materials
Any basic colors can be ordered in just few clicks
Please click on the links below to order and find more information about the Properties, Features and Benefits of our Standard Inkjet 3Dresyns shown in decreasing order of hardness*
RELATIVE SHORE HARDNESS SCALE AND RIGIDITY IN DECREASING ORDER
Super Elastic, non brittle, foldable, with unique/excellent impact/shattering resistance, non yellowing
Overall Benefits of Standard Inkjet 3Dresyns:
excellent mechanical properties with tensile strength >50 MPa for tougher grades
functional materials for engineering and biomedical applications
biocompatible safe grades
broad range of properties, from ultra hard & tough to super elaastic grades
broad elongation range, from <1-10% and up to 100%
high tear resistance for rigid, tough and tough and foldable grades
high resilience for hard, tough, flexible and foldable grades
high impact and shattering resistance for even hard grades
very high resolution c.10-20 microns
very low shrinkage c.<1%
printable by most commercial and professional Inkjet printers, including MultiJet MJP and PolyJet PJP printers
organo-tin and epoxy free
Basic colors can be ordered in just few clicks
* Note: Shore hardness values are relative and approximate, since in practice hardness can be perceived higher or lower than the declared values. Hardness depends on several variables, including dosage of Fine Tuners FT1 and LB1 used, light wavelength and power, exposure time, post-curing settings, time from printing until hardness readings since materials tend to get harder upon time until their properties stabilise in a couple of hours, effect of room temperature when making the hardness readings, specially for flexible grades, etc.
Shore hardness readings also depend on the thickness of the prints. Below 6 mm thickness, and when readings are too close to the sides (less than 12 mm) materials may show lower or higher hardness readings, specially for flexible grades.
Since most 3D prints are usually small in size, perceived hardness (and rigidity) differs from Shore hardness readings undertaken with bigger prints, with more than 6 mm thick and at least 12 mm from the sides.
Perceived foldability also depends on the thickness of the print: the higher the thickness the lower the foldability for the same resin.
Please contact us to consult about our Standard Inkjet 3Dresyns and your specific performance goals at:info@3Dresyns.com