{"product_id":"3dresyn-brs-r1-for-printing-biocompatible-rigid-scaffolds","title":"3Dresyn BRS R1, for printing biocompatible rigid scaffolds","description":"\u003ch4\u003eProduct description\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e3Dresyn® BRS R1\u003c\/strong\u003e is a rigid biocompatible photopolymer developed for scaffold fabrication and bioprinting applications requiring higher stiffness, controlled degradation behavior and partial bioabsorbability.\u003c\/p\u003e\n\n\u003ch4\u003eApplication framework\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in vat photopolymerization systems (SLA, DLP and LCD) and compatible bioplotting systems with UV\/Visible curing units within controlled professional environments. Suitable for research and development in tissue engineering, rigid scaffold fabrication and biocompatible device prototyping.\u003c\/p\u003e\n\n\u003ch4\u003eImportant regulatory note\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThis material is partially bioabsorbable, not fully bioabsorbable.\u003c\/strong\u003e Degradation, resorption and biological response depend on geometry, curing conditions, post-processing and application environment. Final biocompatibility and bioabsorption performance must be validated by the user according to applicable regulatory frameworks (e.g. ISO 10993).\u003c\/p\u003e\n\n\u003ch4\u003eTypical applications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRigid 3D printed scaffolds for tissue engineering research\u003c\/li\u003e\n\u003cli\u003eBioprinting structures requiring higher stiffness\u003c\/li\u003e\n\u003cli\u003eBioactive composite scaffolds\u003c\/li\u003e\n\u003cli\u003eBiocompatible prototyping of medical research devices\u003c\/li\u003e\n\u003cli\u003e2D and 3D bioprinting systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eMeasured mechanical properties\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eShore hardness: D70 (ISO 868)\u003c\/li\u003e\n\u003cli\u003eFlexural strength: \u0026lt;10 MPa (ISO 178)\u003c\/li\u003e\n\u003cli\u003eYoung’s modulus: \u0026lt;1000 MPa (ISO 527)\u003c\/li\u003e\n\u003cli\u003eElongation: \u0026lt;10% (ISO 527)\u003c\/li\u003e\n\u003cli\u003eVery low shrinkage (internal method)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eFunctional performance characteristics\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHard and rigid resin after curing\u003c\/li\u003e\n\u003cli\u003e100% biocompatible resin without toxic risk pictograms (when fully cured and properly processed)\u003c\/li\u003e\n\u003cli\u003eSimilar properties but slower biodegradation and bioabsorption than 3Dresyn® Bio Scaffolds1, 2, 3 \u0026amp; 4\u003c\/li\u003e\n\u003cli\u003eUltra pure and safe, non-cytotoxic once fully cured and cleansed\u003c\/li\u003e\n\u003cli\u003e100% solids formulation\u003c\/li\u003e\n\u003cli\u003eBio-based from renewable resources (\u0026gt;75% bio content)\u003c\/li\u003e\n\u003cli\u003eBiocompatible, biodegradable and \u003cstrong\u003epartially bioabsorbable\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eLow-medium hardness and toughness with increased rigidity\u003c\/li\u003e\n\u003cli\u003eVery high resolution\u003c\/li\u003e\n\u003cli\u003eVery low shrinkage\u003c\/li\u003e\n\u003cli\u003eOrgano-tin free formulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eProcessing and handling performance\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePrintable by most commercial and professional SLA, DLP and LCD printers\u003c\/li\u003e\n\u003cli\u003eCompatible with bioplotters using UV\/Visible curing units\u003c\/li\u003e\n\u003cli\u003eIncreased durability of the resin tank\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eProcessing note\u003c\/h4\u003e\n\u003cp\u003eBiocompatibility and degradation behavior are strongly dependent on post-processing (cleaning, post-curing) and final part geometry. Incomplete curing or insufficient cleaning may result in cytotoxic effects.\u003c\/p\u003e\n\n\u003ch4\u003eTesting \u0026amp; processing disclaimer\u003c\/h4\u003e\n\u003cp\u003eMaterial performance, biocompatibility, biodegradation and bioabsorption depend on printer type, exposure conditions, geometry, post-processing and application environment. Full validation according to relevant standards (e.g. ISO 10993 series) is required for each specific application.\u003c\/p\u003e\n\n\u003ch4\u003eWhy choose 3Dresyn® BRS R1\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRigid scaffold material with higher mechanical stability\u003c\/li\u003e\n\u003cli\u003eControlled and slower degradation profile\u003c\/li\u003e\n\u003cli\u003eHigh-purity biocompatible formulation\u003c\/li\u003e\n\u003cli\u003eHigh resolution and dimensional stability\u003c\/li\u003e\n\u003cli\u003eSuitable for advanced tissue engineering research\u003c\/li\u003e\n\u003cli\u003eBio-based and organo-tin free formulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eRegulatory \u0026amp; legal notice\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThis material is supplied as a professional R\u0026amp;D material and is not marketed as a finished medical device.\u003c\/strong\u003e It is not certified for implantation. Final biocompatibility, degradation, bioabsorption and regulatory compliance remain the responsibility of the user.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 1px solid rgba(0,0,0,.14); padding: 16px; border-radius: 18px; background: #fafafa; margin-top: 24px; margin-bottom: 12px;\"\u003e\n\u003cstrong\u003ePart of the 3Dresyns® Technical Documentation System\u003c\/strong\u003e\n\u003cp style=\"margin: .5rem 0 0 0;\"\u003eThis technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.\u003c\/p\u003e\n\u003cp style=\"margin: .6rem 0 0 0;\"\u003e\u003ca href=\"https:\/\/www.3dresyns.com\/pages\/resources\"\u003eAccess the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp style=\"font-size: 0.9em; opacity: 0.8;\"\u003eDocument reference: TDS-BRS-R1-EN | Version: 1.0 | Last updated: March 2026\u003c\/p\u003e","brand":"3Dresyns","offers":[{"title":"1000 grams","offer_id":50942683709774,"sku":"P20938","price":833.0,"currency_code":"EUR","in_stock":true},{"title":"500 grams","offer_id":50942683742542,"sku":"P20939","price":476.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0282\/5616\/products\/140.png?v=1667731708","url":"https:\/\/www.3dresyns.com\/en-de\/products\/3dresyn-brs-r1-for-printing-biocompatible-rigid-scaffolds","provider":"3Dresyns","version":"1.0","type":"link"}