{"product_id":"3dresyn-od-bci1-mf-bio-monomer-free-biocomposite-resin-for-professional-dental-implant-related-laboratory-workflo","title":"3Dresyn OD BCI1 MF Bio – Monomer-Free Biocomposite Resin for Professional Dental Implant-Related Laboratory Workflows","description":"\u003ch4\u003eProduct description\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e3Dresyn® OD BCI1 MF Bio\u003c\/strong\u003e is an advanced monomer-free biocomposite photopolymer engineered for implant-related dental applications requiring high mechanical strength, dimensional stability and controlled bioelastic response.\u003c\/p\u003e\n\u003cp\u003eThe formulation is designed to support metal-free restorative concepts while providing balanced load distribution under occlusal forces and improved fatigue resistance compared to conventional polymer systems.\u003c\/p\u003e\n\u003ch4\u003eApplication framework\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in vat photopolymerization systems (SLA, DLP and LCD) within controlled professional laboratory environments.\u003c\/p\u003e\n\u003cp\u003eFinal suitability, structural validation and regulatory compliance of printed parts must be assessed by the user according to the specific device design, workflow validation and applicable regulatory requirements.\u003c\/p\u003e\n\u003ch4\u003eTypical applications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eImplant-related dental components\u003c\/li\u003e\n\u003cli\u003eTemporary or functional implant-supported structures\u003c\/li\u003e\n\u003cli\u003eMetal-free restorative concepts\u003c\/li\u003e\n\u003cli\u003eCustom structural dental components requiring high stiffness and fatigue resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMeasured mechanical properties\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTensile strength: up to 140 MPa (ISO 527-1 \/ ISO 527-2)\u003c\/li\u003e\n\u003cli\u003eFlexural strength: up to 140 MPa (ISO 178 \/ ISO 20795-1 reference framework)\u003c\/li\u003e\n\u003cli\u003eYoung’s modulus: ~3000 MPa (ISO 527-1 \/ ISO 527-2)\u003c\/li\u003e\n\u003cli\u003eElongation at break: \u0026lt;7% (ISO 527-1 \/ ISO 527-2)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompressive strength: up to 140 MPa (ISO 604 reference framework)\u003c\/li\u003e\n\u003cli\u003eShore hardness: \u0026gt;D90 (ISO 868)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMeasured physical properties\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eColor: whitish\u003c\/li\u003e\n\u003cli\u003eRadiopacity: radiopaque (non-radioactive), visible under X-ray or CT imaging\u003c\/li\u003e\n\u003cli\u003eWater solubility: ≤1.6 µg\/mm³ (reference methodology aligned with ISO 20795-1)\u003c\/li\u003e\n\u003cli\u003eWater sorption (ULWA): ≤32 µg\/mm³ (reference methodology aligned with ISO 20795-1)\u003c\/li\u003e\n\u003cli\u003eShrinkage: low\u003c\/li\u003e\n\u003cli\u003eResolution capability: up to 20 µm\u003c\/li\u003e\n\u003cli\u003eViscosity of LV version: \u0026lt;10000 mPas at 23°C ± 2°C (ISO 3219)\u003c\/li\u003e\n\u003cli\u003eViscosity of HV version: \u0026lt;5000 mPas at 23°C ± 2°C (ISO 3219)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFunctional performance characteristics\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBioelastic structural behavior for balanced load distribution under occlusal forces\u003c\/li\u003e\n\u003cli\u003eEnhanced fracture and fatigue resistance under controlled laboratory processing conditions\u003c\/li\u003e\n\u003cli\u003eHigh surface stability and chemical resistance compared to conventional thermoplastic polymers\u003c\/li\u003e\n\u003cli\u003eBalanced micro-resilience and abrasion resistance\u003c\/li\u003e\n\u003cli\u003eMetal- and corrosion-free material platform\u003c\/li\u003e\n\u003cli\u003eRecommended for implant diameters\/thicknesses of 4–5.5 mm (≥4 mm for enhanced structural performance)\u003c\/li\u003e\n\u003cli\u003eGeometry-dependent validation required for load-bearing applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProcessing and handling performance\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLV version: lower viscosity for printing below 25ºC or without heated vats\u003c\/li\u003e\n\u003cli\u003eHV version: higher viscosity for controlled processing above 25ºC\u003c\/li\u003e\n\u003cli\u003ePrintable on most commercial and professional SLA, DLP and LCD 3D printers\u003c\/li\u003e\n\u003cli\u003eLow shrinkage and excellent dimensional stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eChemical and safety characteristics\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMonomer-free formulation designed to reduce residual monomer content\u003c\/li\u003e\n\u003cli\u003eResidual monomer content controlled under validated curing and post-processing conditions (internal method)\u003c\/li\u003e\n\u003cli\u003eOrgano-tin free formulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eBiocompatibility framework\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBiocompatibility-related evaluation may be performed according to ISO 10993 depending on formulation and validated workflow\u003c\/li\u003e\n\u003cli\u003eManufacturing aligned with ISO 13485 quality management systems\u003c\/li\u003e\n\u003cli\u003eFinal device validation remains responsibility of the legal manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTesting \u0026amp; processing disclaimer\u003c\/h4\u003e\n\u003cp\u003eMechanical testing, fatigue validation and biocompatibility evaluation must be performed by device manufacturers within their selected printer, processing and post-curing protocols, as polymer conversion and final properties depend on workflow parameters.\u003c\/p\u003e\n\u003ch4\u003eDisclaimer\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThis material is supplied as a professional manufacturing material for laboratory workflows. It is not marketed as a finished medical implant.\u003c\/strong\u003e The regulatory classification, validation and compliance of any final medical device manufactured using this material remain the responsibility of the legal manufacturer in accordance with Regulation (EU) 2017\/745.\u003c\/p\u003e\n\u003cdiv style=\"border: 1px solid rgba(0,0,0,.14); padding: 16px; border-radius: 18px; background: #fafafa; margin-top: 24px; margin-bottom: 12px;\"\u003e\n\u003cstrong\u003ePart of the 3Dresyns® Technical Documentation System\u003c\/strong\u003e\n\u003cp style=\"margin: .5rem 0 0 0;\"\u003eThis technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.\u003c\/p\u003e\n\u003cp style=\"margin: .6rem 0 0 0;\"\u003e\u003ca href=\"https:\/\/www.3dresyns.com\/pages\/resources\"\u003eAccess the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size: 0.9em; opacity: 0.8;\"\u003eDocument reference: TDS-OD-BCI1-MF-BIO-EN | Version: 2.0 | Last updated: March 2026\u003c\/p\u003e","brand":"3Dresyns","offers":[{"title":"250 grams","offer_id":43783002161326,"sku":"P20663","price":476.0,"currency_code":"EUR","in_stock":true},{"title":"500 grams","offer_id":43782998327470,"sku":"P20662","price":892.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0282\/5616\/products\/dental-ge27147185_19202.jpg?v=1676983342","url":"https:\/\/www.3dresyns.com\/en-de\/products\/3dresyn-od-bci1-mf-bio-monomer-free-biocomposite-resin-for-professional-dental-implant-related-laboratory-workflo","provider":"3Dresyns","version":"1.0","type":"link"}