{"product_id":"3dresyn-od-clear-bio-rigid-clear-dental-photopolymer-for-professional-guide-splint-laboratory-workflows","title":"3Dresyn OD-Clear BIO –  Rigid Clear Dental Photopolymer for Professional Guide \u0026 Splint Laboratory Workflows","description":"\u003ch4\u003eProduct description\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003e3Dresyn® OD-Clear BIO\u003c\/strong\u003e is a rigid, transparent dental photopolymer formulation developed for professional laboratory fabrication workflows of guide-type dental components and rigid protective appliances requiring high mechanical strength, dimensional accuracy and structural stability.\u003c\/p\u003e\n\u003ch4\u003eApplication framework\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in vat photopolymerization systems (SLA, DLP and LCD) within controlled professional laboratory environments. Final suitability of printed parts must be validated by the user according to the specific device design, processing protocol and applicable regulatory requirements.\u003c\/p\u003e\n\u003ch4\u003eTypical applications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eGuide-type dental components for drilling workflows\u003c\/li\u003e\n\u003cli\u003ePositioning and alignment components for implant-related procedures\u003c\/li\u003e\n\u003cli\u003eClear rigid dental guard components\u003c\/li\u003e\n\u003cli\u003eDental appliances requiring high rigidity and optical transparency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMeasured mechanical properties\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTensile strength: \u0026gt;40 MPa (ISO 527-1 \/ ISO 527-2)\u003c\/li\u003e\n\u003cli\u003eFlexural strength: \u0026gt;80 MPa (ISO 178)\u003c\/li\u003e\n\u003cli\u003eYoung’s modulus: 2000–2500 MPa (ISO 527-1 \/ ISO 527-2)\u003c\/li\u003e\n\u003cli\u003eElongation at break: \u0026lt;3 % (ISO 527-1 \/ ISO 527-2)\u003c\/li\u003e\n\u003cli\u003eShore hardness: D85 (ISO 868)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMeasured physical properties\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWater sorption (ULWA): ≤32 µg\/mm³ (reference testing aligned with ISO 20795-1 methodology)\u003c\/li\u003e\n\u003cli\u003eWater solubility: ≤1.6 µg\/mm³ (reference testing aligned with ISO 20795-1 methodology)\u003c\/li\u003e\n\u003cli\u003eResidual monomer content: \u0026lt;0.1 % when properly cured and post-processed\u003c\/li\u003e\n\u003cli\u003eResolution capability: up to 20 µm\u003c\/li\u003e\n\u003cli\u003eLow shrinkage supporting dimensional accuracy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eViscosity of HV version: \u0026lt;6000 mPas at 23°C ± 2°C (ISO 3219)\u003c\/li\u003e\n\u003cli\u003eViscosity of LV version: \u0026lt;3000 mPas at 23°C ± 2°C (ISO 3219)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFunctional performance characteristics\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHigh rigidity suitable for guide-type and rigid appliance fabrication workflows\u003c\/li\u003e\n\u003cli\u003eResistance to deformation under mechanical load\u003c\/li\u003e\n\u003cli\u003eHigh dimensional accuracy and structural stability\u003c\/li\u003e\n\u003cli\u003eDurable mechanical performance with resistance to cracking and fatigue under controlled processing conditions\u003c\/li\u003e\n\u003cli\u003eExcellent optical clarity for visual inspection\u003c\/li\u003e\n\u003cli\u003eSurface quality suitable for polishing and post-processing\u003c\/li\u003e\n\u003cli\u003eStable performance under typical dental laboratory cleaning and disinfection workflows, depending on validated process parameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProcessing and handling performance\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eLow viscosity for improved resin flow and printability\u003c\/li\u003e\n\u003cli\u003ePrintable on most commercial and professional SLA, DLP and LCD 3D printers\u003c\/li\u003e\n\u003cli\u003eIncreased durability of the resin tank\u003c\/li\u003e\n\u003cli\u003ePrinting technologies: SLA, DLP and LCD\u003c\/li\u003e\n\u003cli\u003eWavelength range: 385–405 nm\u003c\/li\u003e\n\u003cli\u003ePost-processing: wash and post-cure according to a validated laboratory workflow appropriate for the intended device type\u003c\/li\u003e\n\u003cli\u003eAvailable units: 500 g, 1,000 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eChemical and safety characteristics\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOrgano-tin free\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eBiocompatibility framework\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBiocompatibility-related testing may be performed in accordance with relevant ISO 10993 methodologies depending on formulation version and validated processing protocol\u003c\/li\u003e\n\u003cli\u003eManufacturing aligned with ISO 13485 quality management systems\u003c\/li\u003e\n\u003cli\u003eFinal biological performance depends on validated processing workflow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTesting \u0026amp; processing disclaimer\u003c\/h4\u003e\n\u003cp\u003eMaterial properties are measured on printed and post-processed specimens and may vary depending on printer type, printing parameters, build orientation, post-curing conditions and specimen preparation. Reported information is provided for reference only.\u003c\/p\u003e\n\u003ch4\u003eDisclaimer\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eThis material is supplied as a professional manufacturing material for laboratory workflows. It is not marketed as a finished medical device.\u003c\/strong\u003e The regulatory classification, conformity assessment and validation of any final dental device manufactured using this material remain the sole responsibility of the legal manufacturer in accordance with applicable regulations, including Regulation (EU) 2017\/745.\u003c\/p\u003e\n\u003cdiv style=\"border: 1px solid rgba(0,0,0,.14); padding: 16px; border-radius: 18px; background: #fafafa; margin-top: 24px; margin-bottom: 12px;\"\u003e\n\u003cstrong\u003ePart of the 3Dresyns® Technical Documentation System\u003c\/strong\u003e\n\u003cp style=\"margin: .5rem 0 0 0;\"\u003eThis technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.\u003c\/p\u003e\n\u003cp style=\"margin: .6rem 0 0 0;\"\u003e\u003ca href=\"https:\/\/www.3dresyns.com\/pages\/resources\"\u003eAccess the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size: 0.9em; opacity: 0.8;\"\u003eDocument reference: TDS-OD-CLEAR-BIO-EN | Version: 2.0 | Last updated: March 2026\u003c\/p\u003e","brand":"3Dresyns","offers":[{"title":"1000 grams","offer_id":28889823745,"sku":"P10867","price":190.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0282\/5616\/products\/G1.jpg?v=1648114342","url":"https:\/\/www.3dresyns.com\/en-de\/products\/3dresyn-od-clear-bio-rigid-clear-dental-photopolymer-for-professional-guide-splint-laboratory-workflows","provider":"3Dresyns","version":"1.0","type":"link"}