{"product_id":"clear-detoxifier-and-purification-kit-is-a-post-processing-system-designed-to-support-the-cleansing-and-chemical-treatment-of-3d-printed-photopolymer-parts","title":"Clear Detoxifier and Purification Kit is a post-processing system designed to support the cleansing and chemical treatment of 3D printed photopolymer parts","description":"\u003ch4\u003eProduct description\u003c\/h4\u003e\n\u003cp\u003eThis kit is intended to assist in the reduction of residual unreacted species and byproducts following printing and light post-curing. Proper post-processing is a critical step in workflows involving biocompatible-oriented resin systems.\u003c\/p\u003e\n\u003cp\u003eIt is a processing aid for advanced post-processing workflows and does not certify, guarantee or replace biological testing, regulatory validation or device-level qualification.\u003c\/p\u003e\n\u003ch4\u003eApplication framework\u003c\/h4\u003e\n\u003cp\u003eDesigned for professional use in advanced post-processing workflows for dental, hearing and biomedical laboratory applications involving biocompatible-oriented resin systems.\u003c\/p\u003e\n\u003ch4\u003eTypical applications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSupport reduction of residual monomers and curing byproducts\u003c\/li\u003e\n\u003cli\u003eAssist surface purification of printed parts\u003c\/li\u003e\n\u003cli\u003eImprove surface appearance of clear or transparent prints\u003c\/li\u003e\n\u003cli\u003eSupport advanced post-processing workflows for dental, hearing and biomedical laboratory applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMeasured physical properties\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTotal chemical treatment time: approximately 10–20 minutes following light post-curing\u003c\/li\u003e\n\u003cli\u003eDetoxifier immersion time: 5–10 minutes at room temperature\u003c\/li\u003e\n\u003cli\u003ePurification treatment time: 5–10 minutes\u003c\/li\u003e\n\u003cli\u003eKit contents: 2 graduated immersion beakers\u003c\/li\u003e\n\u003cli\u003eKit contents: 4 × 250 mL bottles containing 2.5 g Clear Detoxifier (white powder)\u003c\/li\u003e\n\u003cli\u003eKit contents: 1 × bottle containing 50 g Purification powder (to be dissolved in 1 L water)\u003c\/li\u003e\n\u003cli\u003ePreparation: Add 250 mL water to each Detoxifier bottle immediately before use\u003c\/li\u003e\n\u003cli\u003ePreparation: Add 1 L water to the Purification powder and mix thoroughly until fully dissolved\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFunctional performance characteristics\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHigh efficiency reduction of surface residuals when used according to IFU\u003c\/li\u003e\n\u003cli\u003eImproved visual clarity and whitening of transparent prints\u003c\/li\u003e\n\u003cli\u003ePowder-based system activated with water prior to use\u003c\/li\u003e\n\u003cli\u003eThis protocol supports reduction of extractable surface species\u003c\/li\u003e\n\u003cli\u003eProper post-processing using validated cleansing workflows may reduce surface inhibition effects with certain platinum-catalyzed RTV silicones\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProcessing and handling performance\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAlways follow the \u003ca href=\"https:\/\/www.3dresyns.com\/pages\/instructions-for-use-ifu\" class=\"text-link\"\u003eInstructions for Use (IFU)\u003c\/a\u003e before applying this protocol\u003c\/li\u003e\n\u003cli\u003eStep 1 – Initial Cleaning: Clean printed parts according to the applicable IFU and ensure adequate light post-curing before proceeding\u003c\/li\u003e\n\u003cli\u003eStep 2 – Detoxifier Immersion: Immerse the printed parts completely in a flask containing the prepared Clear Detoxifier solution for 5–10 minutes at room temperature\u003c\/li\u003e\n\u003cli\u003eStep 3 – Purification Treatment: Transfer the parts into the prepared Purification solution for 5–10 minutes to assist removal of remaining reaction byproducts and discoloration\u003c\/li\u003e\n\u003cli\u003eStep 4 – Final Rinse: Rinse parts thoroughly at least twice in clean water to remove any remaining treatment solution\u003c\/li\u003e\n\u003cli\u003eUsers must independently verify performance within their regulated manufacturing process\u003c\/li\u003e\n\u003cli\u003eCompatibility should be verified by the user\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eChemical and safety characteristics\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRead the MSDS before use (contains corrosive components)\u003c\/li\u003e\n\u003cli\u003eWear gloves and protective goggles\u003c\/li\u003e\n\u003cli\u003eAvoid contact with skin and eyes\u003c\/li\u003e\n\u003cli\u003eDispose of solutions according to local chemical regulations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTesting \u0026amp; processing disclaimer\u003c\/h4\u003e\n\u003cp\u003eThis protocol supports reduction of extractable surface species but does not substitute biological evaluation. Biocompatibility outcomes depend on resin formulation, printer parameters, geometry, and complete workflow validation. Surface chemistry and extractables depend on the complete material–printer–post-processing system and must be validated by the user within their regulatory framework.\u003c\/p\u003e\n\u003ch4\u003eDisclaimer\u003c\/h4\u003e\n\u003cp\u003eThis kit is a processing aid and does not certify, guarantee or replace biological testing, regulatory validation or device-level qualification. Final medical device compliance and biocompatibility assessment remain the responsibility of the legal manufacturer.\u003c\/p\u003e\n\u003cdiv style=\"border: 1px solid rgba(0,0,0,.14); padding: 16px; border-radius: 18px; background: #fafafa; margin-top: 24px; margin-bottom: 12px;\"\u003e\n\u003cstrong\u003ePart of the 3Dresyns® Technical Documentation System\u003c\/strong\u003e\n\u003cp style=\"margin: .5rem 0 0 0;\"\u003eThis technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.\u003c\/p\u003e\n\u003cp style=\"margin: .6rem 0 0 0;\"\u003e\u003ca href=\"https:\/\/www.3dresyns.com\/pages\/resources\"\u003eAccess the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size: 0.9em; opacity: 0.8;\"\u003eDocument reference: TDS-CLEAR-DETOXIFIER-PURIFICATION-KIT-EN | Version: 1.0 | Last updated: March 2026\u003c\/p\u003e","brand":"3Dresyns","offers":[{"title":"Default Title","offer_id":38191810576558,"sku":"P11197","price":178.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0282\/5616\/products\/cleaning-fluid-bio2_a8d22866-d77a-49d4-b764-3df917aa96eb.png?v=1667736918","url":"https:\/\/www.3dresyns.com\/en-de\/products\/clear-detoxifier-and-purification-kit-is-a-post-processing-system-designed-to-support-the-cleansing-and-chemical-treatment-of-3d-printed-photopolymer-parts","provider":"3Dresyns","version":"1.0","type":"link"}