Compatible and made to order 3Dresyns with most SLA, DLP, LCD and Inkjet 3D printers
Most of our "made to order" 3D resins are compatible and ready to print with most SLA, DLP, LCD and Inkjet 3D printers (list of compatible printers)
Our SLA, DLP & LCD 3D resins can be printed with most open and closed mode SLA, DLP, LCD & Inkjet printers and are made to order for your printer model.
Our consulting services of Full 3D Printing System solutions include all the know how required for amateur and professional printing: instrumentation (3D printer with radiometry, light power and temperature control, washing and postcurintg units, materials and all the basic tools and training for start printing straight away.
"Our Standard, NextGen, Specialty and few more 3Dresyns are fine tuned and exhibit excellent resolution with the Form 2 in open mode using Formlabs original settings of clear version 2 and in the Form 3 with the universal cartridge system of ProtoART"
The following 3Dresyns are plug and play in the Form 2 & 3:
- Value for money 3Dresyns
- Standard 3Dresyns
- Next Generation 3Dresyns
- Specialty 3Dresyns
- Orthodontics and Dental 3Dresyns
- ESD compliant 3Dresyns
Our SLA, DLP & LCD 3D resins can print with excellent speed and resolution with any open and closed mode printers, such as Asiga, Wanhao D7, Anycubic Photon, Phrozen, etc.
Most of our 3D resins are designed and adjusted to your printer specifications (light wavelength and power) for direct printability in your specific printer model.
Our fast & easy calibration tests for finding your optimum printing settings in your printer can be requested and sent after ordering your 3Dresyns. Click on this link for more information: 3D printing guidelines.
Our Inkjet 3D resins have also been specifically designed to print with open and closed mode inkjet printers, including Multijet (3D Systems), Polyjet (Stratasys), Agilista (Keyrence) and other professional 3D inkjet printers.
We also have Volumetric 3D resins and multiwavelength 3D resins for volumetric materializing technologies based on dual wavelength curing systems, such as the new volumetric "Xolography" 3D printer XUBE by XOLO.
3Dresyns goals are your own goals
3Dresyns goal is to offer a full range of ready from the bottle solutions as well a full range of fine tuning chemicals and processes to give you the possibility of adjusting and designing materials to meet your specifications.
This is offered for systems ranging from simple hobby type use, through to complex cutting edge solutions using high end “technical” and “commercial production” printers with resins designed to do exactly what you want.
Don´t accept second best. Don´t accept trying to find and use a "one size fits all" type solution that does not offer you the best possible answer for YOUR application.
Our resins come as standard ready to print; approximately 90 to 95% of our resins printability and performance will come straight out of the bottle as supplied. You will be pleased to find that even then, the performance (printability and mechanical properties) far exceeds our competitor’s resins.
If you want even greater performance to suit your individual printer settings and design, then we offer further fine tuning additives and even more detailed instructions that will enhance those properties.
Every make of printer and even “similar or identical” printers from within a manufacturers range suffer from variations in the energy available to cure the resin.
We could play safe and simply design a “midpoint" resin to allow it to cure in all scenarios and printers but the very real disadvantage of this midpoint resin design approach is that it will not fully satisfy all printer settings and consequently prints might suffer from poor printability, print failure, slow or too fast cure, etc,... resulting in dimensional distortion, lack of resolution, excessive brittleness because or over curing or undercuring leaving excessive unreacted residual monomer, and unfortunately affecting the safety of prints and end users.
To us it is better to have a material that cures properly and does not suffer from being too brittle, is poorly defined or dimensionally inaccurate. Quality is the most important thing and a “one size fits all” type resin does not offer such quality or performance.
Contact us to get further advice and quotations if you need printing guidelines, a technical training or customisation services for new product design.
It might be a lot less in cost than you think and save you many expensive hours of research and costly and frustrating mistakes from unsuitable resins. Use our expertise and experience to get fast results and answers to your needs.
If you are unsure then please send us an email for further advice. We will answer it the same day.
As mentioned before, the 3Dresyns team can help you to select the right 3Dresyn among the hundreds of commercial 3Dresyns already available in our online shopping website.
Alternatively, our customisation services can be contracted to customised products, which can be designed to meet your peformance goals and specifications for your specific printer system and application.
Please feel free to contact us and discuss it further!
Please contact us at:info@3Dresyns.com