3Dresyns for direct production of technical ceramics

Our Ceramic 3Dresyns CDP are “ready to use” 3D resins that have been designed for Ceramic Direct Production CDP after dispersion of post-added micron and submicron ceramic materials such as alumina, fused silica, Y-Zirconia, etc.

  • Ceramic 3Dresyn CDP alumina
  • Ceramic 3Dresyn CDP fused silica     
  • Ceramic 3Dresyn CDP-Yttria stabilized zirconia ZrO2
  • Ceramic 3Dresyn CDP-silicon carbides SiC/SiSiC
  • Ceramic 3Dresyn CDP  silicon nitride Si3N4        
  • Ceramic 3Dresyn CDP hydroxy apatite HA
  • Others upon request


Ceramic 3Dresyns CDP have these features and benefits:

    • excellent dispersibility and flow of post added micron and submicron ceramics
    • the ceramic additions can be up to 50% volume concentrations still with good flow
    • very high resolution 3D printing for very high detail and resolution applications
    • high print quality and speed with curing wavelengths up to 410 nm and higher upon request
    • controlled and reproducible process shrinkage
    • minimum expansion coefficient and wide temperature interval of debinding to prevent micro-fractures
    • elongation <3%
    • relative low viscosity and good flow
    • very high resolution of 20 microns of final products
    • low shrinkage
    • printable by SLA DLP 3D printers with laser, LED & DLP projectors of at least 250 mW or 2000 Lumens
    • increased durability of the resin tank
    • organo-tin free

Ceramic Direct production CDP of High Ceramic Content Slurries HCCS      

Ceramic 3Dresyns CDP-HCCS are ready to print high ceramic content  resin slurries.
These pre-dispersed high ceramic content  resin slurries can be available upon request to adapt to  specific customer requirements:
  • Ceramic 3Dresyn CDP-HCCS alumina Al2O3 slurry
  • Ceramic 3Dresyn CDP-HCCS fused silica slurry      
  • Ceramic 3Dresyn CDP-HCCS Yttria stabilized zirconia ZrO2 slurry
  • Ceramic 3Dresyn CDP-HCCS silicon carbides SiC/SiSiC slurry 
  • Ceramic 3Dresyn CDP-HCCS silicon nitride Si3N4 slurry          
  • Ceramic 3Dresyn CDP-HCCS hydroxy apatite HA slurry
  • Others upon request
Compatibility of ceramic 3Dresyns with SLA/DLP 3D printers. For more info click here.
Please contact us to consult about our Ceramic 3Dresyns and your performance goals at: