3Dresyns for direct production of technical metals

Our Metal 3Dresyns MDP are “ready to use” resins that have been designed for Metal Direct Production MDP after dispersion of post-added micron and submicron metals such as stainless steel, titanium, Wo-Mo, Co-Cr, etc.

  • Metal 3Dresyn MDP Stainless Steel 316L
  • Metal 3Dresyn MDP Titanium
  • Metal 3Dresyn MDP Wolfram(Tungsten) Molybdenum W-Mo alloys
  • Metal 3Dresyn MDP Cobalt Chrome Co Cr alloys


Metal 3Dresyns MDP have these features and benefits:

    • excellent dispersibility and flow of post added micron and submicron metals
    • the metal additions can be up to 50% volumen concentrations still with good flow
    • very high resolution 3D printing for very high detail and resolution applications
    • high print quality and speed with curing wavelengths up to 410 nm and higher upon request
    • controlled and reproducible process shrinkage
    • minimum expansion coefficient and wide temperature interval of debinding to prevent micro-fractures
    • elongation <3%
    • relative low viscosity, good flow
    • very high resolution of 20 microns of final products
    • low shrinkage
    • printable by SLA DLP 3D printers with laser, LED & DLP projectors of at least 250 mW or 2000 Lumens
    • increased durability of the resin tank
    • organo-tin free

Metal Direct production MDP of High Metal Content Slurries HMCS

Metal 3Dresyns MDP-HMCS are ready to print high metal content resin slurries.

These pre-dispersed high metal content resin slurries can be available upon request to adapt to specific customer requirements*:

  • Metal 3Dresyn MDP-HMCS Stainless Steel 316L slurry
  • Metal 3Dresyn MDP-HMCS Titanium slurry
  • Metal 3Dresyn MDP-HMCS W-Mo alloy slurry
  • Metal 3Dresyn MDP-HMCS Cobalt Chrome alloy slurry

*Please contact us to consult about Metal 3Dresyns and your performance goals at:

Compatibility of metal 3Dresyns with SLA/DLP 3D printers. For more info click here.