3D-ADD SAP1 Bio has these features and benefits:
- recommended for increasing fluid sorption, permeability, breathability and microporosity after addition to any 3Dresyn
- needs to be added to any 3D resin since is non-self printable alone in SLA, DLP and LCD 3D printers
- water and alcohol soluble
- minimum swelling and medium softening yield vs 3D ADD SAP2
- ideal for adjusting as you wish the sorption and permeability of fluids and gases
- super absorption and permeability power
- biocompatible, ultra safe, without any risk pictograms
- variable sorption and permeability in water, alcohol and other fluids or gases depending on dosage and chosen 3Dresyn
- super absorbent, porous and permeable material
- to be added to any 3Dresyn as you wish for increasing its sorption and permeability properties
- 2 available colors: clear and white color
- 3 available materials*:
- Lipo-Phillic LP versions with HLB: < 7.5 (Ultra Low Water Absorption ULWA grades)
- Medium Hydro-Phobicity MHP versions with HLB: 7.5-12
- High Hydro-Phillicity HHP versions with HLB: >12
- dosage recommendations: 10-30% on solids with any 3Dresyn
- optimum performance with our super absorbent 3D resins
- clean and postcure your 3D prints with Cleaning Fluid WS1 and Cleaning Fluid WS2 Bio
It is supplied as a kit, which contains the product, one graduated beaker and one empty 250 mL black bottle to measure, mix, keep and protect the 3D resins from daylight. Please do not expose any 3D resins to natural or room light to prevent their curing.
*Note: the main difference between the versions is the Hydrophilic-Lipophilic Balance (HLB). Please remember to indicate your chosen version in your order, by defect the std grade is the MHP grade!. HLB value of 0 corresponds to a completely hydrophobic molecule and a value of 20 would correspond to a molecule made up completely of hydrophilic components.
After placing your order request the Instructions for Use "IFU" at: info@3Dresyns.com