3Dresyns - 24/7 services and fast Worldwide deliveries. Start ordering by clicking here!

3Dresyn AgNSEK2, electrically conductive clear non soluble nano Silver 3D resin

Regular price 200.00 €

Shipping calculated at checkout.

3Dresyn AgNSEK2 is our electrically conductive clear nano Silver 3D resin for 3D printing high conductivity materials for electronics e.g. transparent electrodes for touch screens, PV, OLED devices and displays. Low cost alternative to TCO.  Other applications: sensors, heaters, lighting, security, photovoltaic cells

Typical values of 3Dresyn AgNSEK2:
  • high clarity and transparency at thin applications (>90% at 450-800 nm)
  • NS grade: Non water Soluble
  • Conductivity: 2.5-2.6  S/m
  • Resistivity 380-390 milli Ohm.m
  • Sheet resistance 1.9-2.1 kiloOhm/square

      Features of 3Dresyn AgNSEK2*:

      • contains Silver(c. 2%)
      • light silver color at thick applications
      • ultra hard and tough UHT, Shore Hardness D80-85
      • tack free finishes after light box postcuring
      • tensile strength <40 MPa
      • Young modulus <2200 MPa
      • flexural strength <30 MPA
      • elongation <7%
      • printable with most SLA, DLP & LCD printers
      • mix 3Dresyn AgSEK2 well gently with a rotational mixer at less than 500 rpm or in an ultrasonic bath without heating for <5-10 minutes until full mixing of the silver (avoid excessive energy to prevent any gelation)

      *Note: conductivity of 3D printed parts will depend on several variables, such as the dosage of Fine Tuner FT1 and LB1 Bio and the sintering/curing cycle used. Conductive products due to their high engineering complexity require the usage of open mode SLA, DLP & LCD printers and skillful users since conductive materials may require fine tuning to different printing and printer specifications

      IMPORTANT: The product if stored at room temperature (<25˚C) has a shelf life of 6 months.  If stored well sealed at 4ºC in a fridge its shelf life can be extended longer. 3Dresyns cannot assume responsibility for a conductive product that has not been stored in appropriate conditions. Orders will be made to order to maximise the shelf life of the product. Its delivery time is around 2 weeks after ordering.