3Dresyn-ase EBC1, Enzymatic Bio Catalyst for fast hydrolisis and biodegradation of 3D printed resins
3Dresyn-ase EBC1 is a liquid Enzymatic Bio Catalyst for fast hydrolisis and biodegradation of 3D printed materials in the outdoor environment. It has been specially designed to biodegrade our 3Dresyn CD Bio D and 3Dresyn Bio D as well as other 3D printed materials and plastics.
Additions at dosage of 0.5% by weight to liquid SLA 3D resins, promote that 3D printed materials hydrolise and break down by enzymatic attack into smaller non hazardous chemicals.
This technology exhibits an increase ability for biodegradation of 3D printed materials and plastics contributing to biodegradation of microplastics. 3Dresyn-ase EBC1 accelerates the biodegradation by increasing the susceptibility for microorganisms and bacterii to break down them into smaller and smaller fragments over time.
The goal of this product line is to promote the usage of biodegradable SLA 3D printing by developing eco friendly enzymatic bio catalysts for fast biodegradation of 3D printed materials.
3Dresyn-ase EBC1 accelerates the biological breakdown into biological simpler substances through the action of enzymes. When this process is completed, the initial organic substances are entirely converted into simple inorganic molecules such as water, methane and carbon dioxide.
One of the key objectives of 3Dresyns is to design, make and promote safe and environmentally friendly 3D resyns,additives and biodegradation promoters to ensure safe printing resin handling and disposal.
This product line has been designed to be safe and environmentally friendly and exhibits these features and benefits:
- environmentally safe probiodegradant by enzymatic attack
- easy addition by simple mixing in any liquid SLA, DLP & LCD 3D resin
- compatible with most commercial SLA, DLP & LCD 3D resins
- biodegradable and eco safe, without any environmental hazards pictogram
3Dresyn-ase EBC1 is supplied as a kit, which contains 1 dispenser with 60 mL of liquid 3Dresyn-ase, 1 measuring flask to measure exactly the minimum volume of 3Dresyns needed for accelerating biodegradability (dependant on minimum required printing volumen of individual resin tanks) and 1 empty 250 mL black bottle to mix, keep and protect 3D resins from day light. Please do not expose 3Dresyns to direct natural or artificial room light to prevent curing.
Note: 3Dresyn-ase EBC1 is recommended for any SLA, DLP & LCD 3D resins. Our 60 mL dispenser is normally used at 0.5% dosage and it is enough for biocatalysing the biodegradability of at least 12 Litres of 3D resins. Monitoring of the biodegradation can be done with our Degradation-Tester
We Also Recommend
Fine Tuner FT1, our general purpose fast "photo accelerant" for UV & Visible up to 410 nm SLA, DLP, LCD & Inkjet 3D printers
Fine Tuner FT2 ultra fast "photo accelerant" for UV & Visible up to 420 nm SLA DLP, LCD & Inkjet 3D printers
Fine Tuner FT3, very low yellowing, fast and low viscosity "photo accelerant" for UV & Visible up to 420 nm SLA, DLP, LCD & Inkjet 3D printers
Fine Tuner FT4 Bio ultra safe "bio photo accelerant" for UV & Visible up to 500 nm 3D printers and 100% Biocompatible systems