3Dresyn CD is our Conceptual Design 3D resin for fast proof of concept printing.
3Dresyns basic 3D resin for printing proof of concept 3D prints. It has been designed to print fast, in less than 2-3 seconds per layer, on any SLA DLP & LCD printer* with good results in terms of definition. It is our very simple, low cost resin to prove that your design concepts look OK, its fast speed and very low cost allows you to make fast changes in your conceptual design before moving to the next stage in your development and printing it with a resin that better suits the desired mechanical properties for your design.
It is simple, cheap and offered with no thrills - it is only available in a single size for the supply to you (1L), and one bio natural color (red). The color changes to clear as its exposed to UV light, helping you with your cleanup after printing. Its very low viscosity (<100 mPas) helps its simplicity. If you want more then look at our basic or specialist range of resins which offer much much more functionality in terms of material properties. What you see is what you get!!
3Dresyn CD has these features and benefits:
- natural bio red color which become clear after curing
- fast printability: < 2-3 seconds per layer*
- very low viscosity (<100 mPas)
- Shore hardness D70
- safe handling
- hard, with minor flexibility
- extreme low shrinkage <5%
- medium tensile strength 20-30 MPa
- elongation <5%
- very high resolution
- printable by most commercial and professional SLA, DLP & LCD 3D printers
- increased durability of the resin tank
- organo-tin free
* Our 3Dresyns have been designed to print in a broad range of printer settings. Nevertheless, our Print Quality Fine Tuners are recommended to fine tune our 3Dresyns to your specific printer settings. For more info click here.