Adhesive 3Dresyn HM "Hot Melt"  has these features and benefits:

• universal UV/Visible curable adhesive
• similar performance to traditional hot melt adhesives  but 3D printable by SLA DLP & LCD
• designed for adhering & gluing a broad range of plastics and metals when heated after 3D printing
• ideal for printing directly on plastics or metals previously attached to the build platform, e.g.  PCB base materials
• cures under sunlight or with any standard light box at high thickness (from 0.1 to 1 cm) in around 2 minutes
• soft non tacky (non fragile) which becomes tacky & adhesive when heated providing strong bonding after cooling
• very low viscosity (<50 mPas)
• very low shrinkage 
• printable by commercial and professional SLA, DLP & LCD 3D printers with non sensitive resin tanks. Requirements:
• PDMS should hold & keep the resin inside to avoid contact & detachment of the PDMS from the hard acrylic bottom (PMMA)
•  PDMS adhered to resin tanks on the bottom of the vats (without shoulders protecting and surrounding the vat walls) can suffer detachment from the hard acrylic bottom (PMMA)
• organo-tin free
• rigidity refinement can be done with our biocompatible Hardness Adjuster 3Dresyn HA1 Bio small dosages c1-10%

Please contact us to consult about our new Adhesive 3Dresyn HM "Hot Melt" at: info@3Dresyns.com 

* Our 3Dresyns have been designed to print in a broad range of printer settings. Nevertheless, our Print Quality Fine Tuners recommended to fine tune our 3Dresyns to your specific printer settings. For more info click here.