Menu
Cart

3Dresyn IM-HDT-WS, high deflection temperature and water soluble for non durable sacrificial very high temperature injection molding

  • 400.00 €

Let us know your SLA, DLP or LCD printer model

3Dresyn IM-HDT-WS  has these features and benefits:
  • recommended for printing Water Soluble WS sacrificial Injection Molds IM for injection of very high injection pressure & temperature materials, plastics, ceramics CIM and metals MIM
  • high deflection temperature HDT, Shore Hardness D85
    • high rigidity at high temperatures (>150C)
  • fast solubility in water
  • tack free finishes after light box postcuring
  • very high tensile strength >40 MPa
  • very high rigidity (Young modulus >3000 MPa) to permit printing of thin rigid mold walls to maximise solubility speed and minimum resin consumption
  • non brittle at injection temperatures
  • elongation <4%
  • very low viscosity, below 150 cps
  • very high resolution (printing resolution of 20 microns)
  • very low shrinkage
  • printable by most commercial and professional SLA, DLP & LCD 3D printers
  • increased durability of the resin tank
  • metal and organo-tin free

Note: water soluble 3D prints can be cleaned and postcured in few steps:

  • step 1 optional but recommended: remove any uncured resin from the print surface with high pressure air with at least 10 bars (the higher the better)
  • step 2 remove any uncured resin from the print surface with our Cleaning Fluid WS1 
  • step 3 Light postcuring in a light box
    • 5-10 minutes is enough to get a dry surface
    • 20 min will increase the rigidity of prints (recommended)
    • 60 minutes will increase the rigidity of prints to its maximum but certain brittleness will appear due to excessive light postcuring

    * Our 3Dresyns have been designed to print in a broad range of printer settings. Nevertheless, our Print Quality Fine Tuners are recommended to fine tune our 3Dresyns to your specific printer settings. For more info click here.


    We Also Recommend