Menu
Cart

3Dresyn IM-UHR-WS, ultra rigid and water soluble for high temperature injection molding

  • 550.00 €

Let us know your SLA, DLP or LCD printer model

3Dresyn IM-UHR-WS  has these features and benefits:

  • recommended for printing Water Soluble WS sacrificial Injection Molds IM for injection of low, medium and high injection pressure & temperature materials, plastics, ceramics CIM and metals MIM
  • ultra hard and ridid UHR, Shore Hardness D80
  • fast solubility in water
  • tack free finishes after light box postcuring
  • very high tensile strength >40 MPa
  • very high rigidity (Young modulus >2500 MPa) to permit printing of thin rigid mold walls to maximise solubility speed and minimum resin consumption
  • high rigidity at high temperatures (>120C)
  • non brittle at injection temperatures
  • elongation <5%
  • very low viscosity, below 100 cps
  • very high resolution (printing resolution of 20 microns)
  • very low shrinkage
  • printable by most commercial and professional SLA, DLP & LCD 3D printers
  • increased durability of the resin tank
  • metal and organo-tin free

Note: water soluble 3D prints can be cleaned and postcured in few steps:

  • step 1 (optional) with a high pressure air compressor of at least 10 bars (the higher the better)
  • step 2 with our Cleaning Fluid WS1 to eliminate from the surface of prints any uncured resin
  • step 3 with acetone to eliminate our Cleaning Fluid WS1 from the surface of prints and leave a dry surface on the prints
  • step 4. Light postcuring in a light box
    • 5 minutes is enough to get a dry surface
    • 20 min will increase the rigidity of prints (recommended)
    • 60 minutes will increase the rigidity of prints to its maximum but certain brittleness will appear due to excessive light postcuring

    * Our 3Dresyns have been designed to print in a broad range of printer settings. Nevertheless, our Print Quality Fine Tuners are recommended to fine tune our 3Dresyns to your specific printer settings. For more info click here.


    We Also Recommend