3Dresyn PI-like has these features and benefits:
- ideal for printing high temperature resistant materials similar to Polyimide
- clear/light transparent orange finishing unless your chosen color is added online
- excellent chemical resitance to most chemicals, including strong oxidizing and reducing agents and strong acids and alkalis
- 100% biocompatible
- choose LV version for a relatively Low Viscosity for printing without heated printers or below 25ºC
- choose HV version for relatively High Viscosity version for printing with heated printers or above 25ºC, for overall improved durability and mechanical properties
- high Deflection Temperature <290ºC @0.45MPa
- high rigidity (Young modulus c. 4000 MPa)
- Shore hardness D85-90 range
- elongation <3-7%
- flexural strength <50 MPa and up to 70 MPa with the optimum printing and postcuring process*
- high impact and shattering resistance (Notched Izod <40 J/m)
- tensile strength <60 MPa
- durable
- high resolution up to 20 micron
- very low shrinkage
- organo tin free
- increased durability of the resin tank
- water solubility: ≤ 1,6 µg/mm3
- hydrophobic, ultra low water sorption ULWA≤ 32 µg/mm3
- printable by SLA, DLP & LCD 3D printers
- if you need pure polyimide then discover our SLA printable sinterable polyimide
*IFU for 100% clarity & transparency (without any haziness or whitish finishing)
- print your 3D designs in any SLA, DLP and/or LCD printer following our printing instructions, which can be sent upon request by email: info@3dresyns.com
- after printing cut the supports and eliminate the uncured resin by gravity from the surface of the prints in the upside down position in an oven heated at 55-60ºC for 30 minutes
- postcure the dry prints in a normal light box for 30 minutes at T<50ºC
- clean parts by spraying IPA using a spray bottle to ensure that clean IPA is always used
- follow our more detailed Instructions for Use "IFU"