
3Dresyn RIC-UTFD50 Bio has these features and benefits:
- ideal ultra tough & foldable material for resin injection and casting at >70ºC
- ultra tough & foldable without breaking at low thickness
- rigid with superior shattering resistance at medium and high thickness
- 100% biocompatible and Monomer Free
- ultrasafe and even skin irritancy pictograms free
- non yellowing
- excellent balance of high relative flexural strength and flexural modulus
- flexural strength <50 MPa
- high impact and shattering resistance (Notched Izod >90 J/m)
- tensile strength <25-30 MPa
- Young modulus >1000 MPa
- Shore hardness D50
- high viscous non flowing resin at room temperature. Typical viscosity:
- 11.000 cps at 70ºC
- 5000 cps at 80ºC
- 2600 cps at 90ºC
- c. 2000 cps at 100ºC
- hardness and rigidity can be custom increased with our Hardness Adjuster 3Dresyn HA1 HV MF Bio at your optimum dosage of 1-15% by weight
- As example: addition of 25% of 3Dresyn HA1 HV MF Bio increases the Shore to D70, the Young modulus to >1500 MPa, the flexural strength to >70 MPa and decreases the viscosity as follows:
- 6.500 cps at 70ºC
- 2900 cps at 80ºC
- 2100 cps at 90ºC
- c. 1800 cps at 100ºC
- bio and synthetic resin source
- elongation 100-110%
- durable
- very high resolution
- very low shrinkage
- organo-tin free
- significant rigidity refinement can be done with our Hardness Adjusters* 3Dresyn SA1 HV Bio and 3Dresyn HA1 HV MF Bio
- detailed rigidity refinement without sacrificing foldability can be done with our Hardness Adjusters* 3Dresyn SA2 LV Bio and 3Dresyn HA2 LV Bio
- curable with light with Fine Tuners FT additives, photo accelerants for increasing the printing speed and/or
- curable with by heat with Fine Tuner TA1, our general purpose fast "Thermal Accelerant" for thermally curing our 3Dresyns