3Dresyn USF Bio D is a Ultra Safe & Fast Bio based "monomer free" 3D resin for proof of concept printing.
3Dresyns basic resin for ultra safe & fast bio based model printing. It has been designed to print ultra fast, in less than 3-4 seconds per layer, on any SLA DLP & LCD printer* with good results in terms of definition. It is our very simple, low cost monomer free resin to prove that your design concepts look OK, its ultra fast printing speed and low cost allows you to make fast changes in your conceptual design before moving to the next stage in your development and printing it with a resin that better suits the desired mechanical properties for your design.
It is simple, cheap, bio based and offered with no thrills - it is only available in a single size for the supply to you (1000 grams), and one bio natural color (red). The color changes to clear as its exposed to UV light.
3Dresyn USF Bio D has these features and benefits:
- natural bio based red color which becomes clear after curing
- ultra fast curing in <3 seconds at 50 microns Z layers when tuned with Fine Tuner FT1
- slow curing in 10-20 seconds at 50 microns when tuned with Fine Tuner FT5 Bio HP
- Shore hardness D70
- monomer free, ultra safe handling
- odorless
- hard, with minor flexibility
- low shrinkage <3%
- medium tensile strength 30-40 MPa
- elongation <5%
- very high resolution
- printable by most commercial and professional SLA, DLP & LCD 3D printers
- increased durability of the resin tank
- organo-tin free
- to be used with our safe resolution increaser Fine Tuner LB1 Bio
- to be used with our bio safe photo catalyst Fine Tuner FT5 Bio HP instead of Fine Tuner FT1 since it is hazardous to aquatic environment
