3Dresyn VAM IM-UHT-WS* has these features and benefits:
- recommended for printing Water Soluble WS sacrificial 3D printed resins
- ultra hard and tough UHT, Shore Hardness D80
- medium rigidity at high temperatures (c.100C)
- fast solubility in water
- tack free finishes after light box postcuring
- very high tensile strength >40 MPa
- high rigidity (Young modulus >2000 MPa) to permit printing of thin rigid mold walls to maximise solubility speed and minimum resin consumption
- non brittle at injection temperatures
- elongation <8%
- high resolution once tuned to specific VAM printer specifications and after full workflow implementation
- very low shrinkage
- metal and organo-tin free
- clean and postcure your 3D prints with Cleaning Fluid WS1 Bio
- printable by VAM 3D printers
*Note: soluble materials may swell instead of dissolve in some printing settings, especially when they are cured at high relative power such as with high poweer settings
After placing your order request the Instructions for Use "IFU" of our water soluble 3D resins at: info@3Dresyns.com
*Note: addition of a suitable photo accelerant is required for printing in specific VAM printers
