Menu
Cart
Fine Tuner FT4 Bio "bio accelerant" for UV & Visible 3D printers and 100% Biocompatible systems

Fine Tuner FT4 Bio "bio accelerant" for UV & Visible 3D printers and 100% Biocompatible systems

  • 150.00 €

Let us know your SLA, DLP or LCD printer model

Fine Tuner FT4 Bio is a non water soluble 100% biocompatible accelerant additive specially recommended to increase the cure speed of our 3Dresyns in SLA, DLP and Inkjet 3D printers working with Ultraviolet and Visible light from 150 to 500 nm: including the far, medium and near UV range, as well as the visible range: daylight, visible lasers, LEDS and DLP projectors.
If you need water soluble 100% biocompatible  accelerant additives please click on: Fine Tuner FT5 Bio WS
The use of Fine Tuner FT4 Bio is ideal for bioprinting and biomedical systems helps to resolve typical printing problems related to under cure, to say:
  • print failure, poor print resolution, print breaking, print and supports under cure , separation of prints from the supports, others

The use of Fine Tuner FT4 Bio is ideal for increasing the print speed of both Ultraviolet and Visible SLA, DLP & Inkjet 3D printers and specially for printing biocompatible systems since it is an ultra safe, not cytotoxic, 100% biocompatible powder material (without any labels/pictograms).

Its use is essential in UV/Visible 3D printers, which do not provide the option of changing neither the light power (mW/cm2) nor curing or exposure time (seconds), because speeds up the cure and fine tunes the quality of your prints. Its usage is not recommended for low power LCD printers, because of the resulting slow kinetics/long exposure times.

Fine Tuner FT4 Bio is supplied as a kit, which contains 50 grams of yellow powder or 100 mL of yellow liquid at 50% powder concentration, 1 measuring flask to measure exactly the minimum volume of 3Dresyns needed for fine tuning (dependant on minimum required printing volumen of individual resin tanks (vats)) and 1 empty 250 mL black bottle to mix, keep and protect fine tuned 3Dresyns from day light. Please do not expose 3Dresyns  to direct natural daylight or artificial room  light to prevent curing.

The yellow color of Fine Tuner FT4 Bio fades or photobleaches to clear during light postcuring in the light box or naturally upon time.

.

Note:  Fine Tuner FT4 Bio is specially recommended for Ultraviolet & Visible  light wavelengths (150-500 nm range) , including 405 nm blue & violet LEDs, lasers and standard DLP projectors and daylight light sources

Instructions about how to fine tune 3Dresyns to your printer settings. For more info click here


We Also Recommend