New: Print Quality Fine Tuner FT1 "accelerant" and LB1 "light blocker" Kit

New: Print Quality Fine Tuner FT1 "accelerant" and LB1 "light blocker" Kit

  • 90.00 €

Our new combined kit of Fine tuner FT1 and LB1 
  • Print Quality Fine Tuner FT1 is an accelerant additive recommended to speed up the cure of our 3Dresyns in SLA DLP & LCD 3D printers. The use of Print Quality Fine Tuner FT1 is ideal for increasing the print speed.
  • On the other hand, Print Quality Fine Tuner LB1 has the opposite effect. It is an additive recommended to reduce print speed, light bleeding or overgrowth  It is a clear liquid Light Blocker (LB) additive developed to improve XYZ resolution by reducing print speed, light penetration, scattering and overgrowth of prints beyond specifications and "support fusing or merging".
The right combination of Fine tuner FT1 and LB1 with the minimum optimum dosage of each permits the fine tuning of our 3Dresyns to get maximum resolution and optimum mechanical properties of your prints with any SLA DLP and LCD printer.

Print Quality Fine Tuner FT1 and LB1 kit is supplied as a kit, which contains 2 dispensers (droppers) with 60 mL of Fine Tuner FT1 and LB1, 1 measuring flask to measure exactly the minimum volume of 3Dresyns needed for fine tuning (dependant on minimum required printing volumen of individual resin tanks (vats)) and 1 empty 250 mL black bottle to mix, keep and protect fine tuned 3Dresins from day light. Please do not expose 3Dresyns  to direct natural or artificial room  light to prevent curing.


Note:  Print Quality Fine Tuner FT1 and LB1 are recommended for printers having UV/Visible  light wavelengths up to 410 nm (250-410 nm range), including 405 nm blue LEDs, lasers and standard DLP projectors and LCDs. Our 60 mL dispensers of Fine tuner FT1 and LB1 are normally used at small dosage and are enough for fine tuning between 6-12 Litres of 3D resins. 

Instructions about how to fine tune 3Dresyns to your printer settings. For more info click here

We Also Recommend