{"product_id":"purification-kit-is-a-post-processing-system-designed-to-support-chemical-cleansing-of-3d-printed-photopolymer-parts-following-printing-and-light-post-curing","title":"Purification Kit is a post-processing system designed to support chemical cleansing of 3D printed photopolymer parts following printing and light post-curing","description":"\u003ch4\u003eProduct description\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ePurification Kit\u003c\/strong\u003e is intended to assist in the reduction of residual unreacted species and curing byproducts from printed parts as part of a controlled and validated workflow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePurification Kit\u003c\/strong\u003e is a processing aid for advanced post-processing workflows and does not certify, guarantee or replace biological testing, cytotoxicity evaluation, regulatory validation or device-level qualification.\u003c\/p\u003e\n\u003ch4\u003eApplication framework\u003c\/h4\u003e\n\u003cp\u003eDesigned for professional use in advanced post-processing workflows in dental, hearing and biomedical laboratory environments to support reduction of residual monomers and reaction byproducts and assist surface purification of printed parts.\u003c\/p\u003e\n\u003ch4\u003eTypical applications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSupport reduction of residual monomers and reaction byproducts\u003c\/li\u003e\n\u003cli\u003eAssist surface purification of printed parts\u003c\/li\u003e\n\u003cli\u003eImprove visual appearance of clear or transparent prints\u003c\/li\u003e\n\u003cli\u003eSupport advanced post-processing workflows in dental, hearing and biomedical laboratory environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMeasured physical properties\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTotal chemical treatment time: approximately 5–10 minutes following light post-curing\u003c\/li\u003e\n\u003cli\u003ePurification immersion time: 5–10 minutes at room temperature\u003c\/li\u003e\n\u003cli\u003eKit supply format: white powder (50 g)\u003c\/li\u003e\n\u003cli\u003ePreparation: add 1 L of water to prepare a 5% solution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFunctional performance characteristics\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHigh efficiency surface cleansing when used according to IFU\u003c\/li\u003e\n\u003cli\u003eImproved whitening and visual clarity of transparent prints\u003c\/li\u003e\n\u003cli\u003ePowder-based system activated with water prior to use\u003c\/li\u003e\n\u003cli\u003eFormulated for controlled laboratory and professional use\u003c\/li\u003e\n\u003cli\u003eThis protocol supports reduction of surface extractables\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProcessing and handling performance\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAlways follow the \u003ca class=\"text-link\" href=\"https:\/\/www.3dresyns.com\/pages\/instructions-for-use-ifu\"\u003eInstructions for Use (IFU)\u003c\/a\u003e before applying this protocol\u003c\/li\u003e\n\u003cli\u003eStep 1 – Initial Cleaning: clean printed parts according to the applicable IFU and ensure adequate light post-curing before proceeding\u003c\/li\u003e\n\u003cli\u003eStep 2 – Purification Immersion: immerse printed parts completely in a flask containing the prepared Purification solution for 5–10 minutes at room temperature\u003c\/li\u003e\n\u003cli\u003eStep 3 – Final Rinse: rinse parts thoroughly at least twice in clean water to remove any remaining treatment solution\u003c\/li\u003e\n\u003cli\u003eMix thoroughly until fully dissolved before use\u003c\/li\u003e\n\u003cli\u003eUsers must independently verify performance within their regulated manufacturing process\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eChemical and safety characteristics\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRead the MSDS before use (contains corrosive components)\u003c\/li\u003e\n\u003cli\u003eWear protective gloves and goggles\u003c\/li\u003e\n\u003cli\u003eAvoid skin and eye contact\u003c\/li\u003e\n\u003cli\u003eDispose of solutions according to local chemical regulations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTesting \u0026amp; processing disclaimer\u003c\/h4\u003e\n\u003cp\u003eThis protocol supports reduction of surface extractables but does not substitute biological evaluation. Biocompatibility outcomes depend on resin formulation, printer parameters, geometry and complete workflow validation. Surface chemistry and extractables depend on the complete material–printer–post-processing system and must be validated by the user within their regulatory framework.\u003c\/p\u003e\n\u003ch4\u003eDisclaimer\u003c\/h4\u003e\n\u003cp\u003eThe Purification Kit is a processing aid. It does not certify, guarantee or replace biological testing, cytotoxicity evaluation, regulatory validation or device-level qualification. Final medical device compliance and safety assessment remain the responsibility of the legal manufacturer.\u003c\/p\u003e\n\u003cdiv style=\"border: 1px solid rgba(0,0,0,.14); padding: 16px; border-radius: 18px; background: #fafafa; margin-top: 24px; margin-bottom: 12px;\"\u003e\n\u003cstrong\u003ePart of the 3Dresyns® Technical Documentation System\u003c\/strong\u003e\n\u003cp style=\"margin: .5rem 0 0 0;\"\u003eThis technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.\u003c\/p\u003e\n\u003cp style=\"margin: .6rem 0 0 0;\"\u003e\u003ca href=\"https:\/\/www.3dresyns.com\/pages\/resources\"\u003eAccess the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp style=\"font-size: 0.9em; opacity: 0.8;\"\u003eDocument reference: TDS-PURIFICATION-KIT-EN | Version: 1.0 | Last updated: March 2026\u003c\/p\u003e","brand":"3Dresyns","offers":[{"title":"Default Title","offer_id":36845820346528,"sku":"P18755","price":80.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0282\/5616\/products\/60_d6bb5f42-98d9-4eac-a186-1675670e6d4a.png?v=1667744804","url":"https:\/\/www.3dresyns.com\/products\/purification-kit-is-a-post-processing-system-designed-to-support-chemical-cleansing-of-3d-printed-photopolymer-parts-following-printing-and-light-post-curing","provider":"3Dresyns","version":"1.0","type":"link"}