3Dresyn VAM Soya2 Bio, bio based soya 3D resin for VAM 3D printers

Product description

3Dresyn VAM Soya2 Bio is a bio based and renewable photopolymer for VAM 3D printers.

This eco-friendly material is made from soybeans and plants, with over 70% renewable bio based content. It is designed to support safe and environmentally friendly 3D printing workflows while delivering hard, tough and rigid performance with certain flexibility.

Application framework

Designed for use in VAM 3D printers for fabrication of hard, tough and rigid printed parts with certain flexibility, very high resolution and very low shrinkage.

Typical applications

• Plant-based VAM 3D printing applications
• Hard and tough printed parts with certain flexibility
• Eco friendly VAM printing workflows

Measured mechanical properties

• Tensile strength: <40 MPa (ISO 527-1 / ISO 527-2)
• Flexural strength: <40 MPa (ISO 178)
• Young’s modulus: >1000 MPa (ISO 527)
• Elongation at break: <20% (ISO 527)
• Shore hardness: D50 (ISO 868)

Measured physical properties

• Viscosity: <35.000 mPas at 23°C ± 2°C (ISO 3219)
• Renewable bio based content: >70%
• Layer curing speed: <3-5 seconds at 50 microns Z layers
• Shrinkage: very low
• VOCs: 0%

Functional performance characteristics

• Bio based and renewable green source
• Eco-friendly, made from soybeans and plants
• Odour free
• Ultra safe, toxic pictograms free
• Ultra fast curing
• Hard with certain flexibility
• Tough and rigid with certain flexibility
• Very high resolution

Processing and handling performance

• Printable by VAM 3D printers
• Addition of a suitable photo accelerant and resolution-er system is required for printing in specific VAM printers
  

Chemical and safety characteristics

• Bio based and renewable source
• Ultra safe, toxic pictograms free
• EN 71-3:2019 compliant
• BPA free
• Transition metals free

Testing & processing disclaimer

Final printability, curing speed, mechanical performance and suitability must be validated by the user according to the intended application, printer configuration and processing conditions.

Disclaimer

This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

Document reference: TDS-3DRESYN-VAM-SOYA2-BIO-EN | Version: 1.0 | Last updated: March 2026