3Dresyn Bioflex A50 MF Monomer Free

Soft biocompatible monomer-free 3D printing resin with high elasticity

Product description

3Dresyn Bioflex A50 MF is a soft biocompatible monomer-free photopolymer resin designed for applications requiring high elasticity, soft touch and mechanical compliance while maintaining dimensional stability after printing and post-curing.

Intended use

Intended for professional use in vat photopolymerization (SLA, DLP and LCD) additive manufacturing.
Final suitability of printed parts must be validated by the user according to the specific application, processing conditions and applicable regulatory requirements.

Typical applications

Soft medical components
Patient-contact flexible parts
Soft interfaces and cushions
Functional biomedical prototypes

Material properties & test methods

Mechanical properties
Shore hardness: A50 (ISO 868)
Tensile strength: ~ 2–5 MPa (typical) (ISO 527-1 / ISO 527-2)
Tensile modulus (Young’s modulus): ~ 1–3 MPa (typical) (ISO 527-1 / ISO 527-2)
Elongation at break: ~ 120–200 % (typical) (ISO 527-1 / ISO 527-2)

Thermal properties
Heat deflection temperature (HDT): < 40 °C @ 0.45 MPa (typical) (ISO 75)

Physical properties
Density: 1.0–1.2 g/cm³ (typical) (ISO 1183)
Water absorption: < 0.1 % (typical, 24 h @ 23 °C) (ISO 62)

Biocompatibility & regulatory framework
Biocompatibility evaluated according to ISO 10993
Manufacturing aligned with ISO 13485 quality management systems

Testing & processing disclaimer
Material properties are measured on printed and post-processed specimens and may vary depending on the selected material version, printer type, printing parameters, build orientation, post-curing conditions and test specimen preparation. Reported values are indicative and provided for reference only.

Printing & processing guidelines

Printing technologies: SLA, DLP and LCD
Wavelength range: 385–405 nm

Product units

Available units: 500 g, 1,000 g