3Dresyn OD-Clear T&C for printing Tough & Comfortable night guards and splints

3Dresyn OD-Clear T&C Tough & Comfortable has these features and benefits:

• tough and comfortable material for printing durable comfortable and resilient night guards and splints, slightly pliable under pressure 
• tough and foldable , semirigid, pliable under pressure at low thickness, with good memory until regains its original shape
• based on 4D Shape Memory Polymers SMP´s, with excellent shape memory with temperature, recovering their shape upon heating
• safe and biocompatible: only mild skin irritant before curing and cleansing
• choose LV version for a relatively Low Viscosity (<6000 mPas) for printing without heated printers or below 25ºC
• choose HV version for relatively High Viscosity (>6000 mPas)  for printing with heated printers or above 25ºC, for overall improved durability  and mechanical properties
• available in two versions: rigid and flexible versions for printing aligners
• suitable for printing flexible thin copings or Indirect Bonding Trays IBTs  at 0.2-0.3 mm for placing attachments
• Shore hardness D60-70 range
• excellent clarity and non yellowing
• flexural strength <40 MPa
• elongation <30%
• high impact and shattering resistance (Notched Izod <70 J/m)
• tensile strength <40 MPa
• rigid and flexible versions with medium rigidity (Young modulus 600-1200 MPa)
• rigid version closer to 1000 MPa for thickness <2 mm
• flexible version closer to 500 MPa for thickness <2 mm
• durable, non yellowing
• high resolution up to 20 micron
• very low shrinkage
• organo tin free
• increased durability of the resin tank
• water solubility: ≤ 1,6 µg/mm3
• hydrophobic, ultra low water sorption ULWA≤ 32 µg/mm3
• residual monomer <0.1%
• printable by most commercial and professional SLA DLP & LCD 3D printers
• fully compliant with the Quality requirements of FDA, ISO 20795, 13485 & 10993
• IFU for 100% clarity & transparency (without any haziness or whitish finishing)