3Dresyn SFUT MF, Super Fast Ultra Tough Monomer Free

Product description

3Dresyn SFUT MF Super Fast & Ultra Tough Monomer Free is our super fast and ultra tough 3D resin for ultra safe fast proof of concept, model, and advanced functional printing.

This monomer free biocompatible resin is designed for fast proof of concept and functional printing. It has been designed to print fast, in less than 4-7 seconds per layer on SLA, DLP and LCD printers, with good results in terms of definition and mechanical strength.

Application framework

Designed for use in vat photopolymerization systems (SLA, DLP and LCD) within professional and industrial environments for fast proof of concept printing, model printing and advanced functional printing.

Typical applications

• Fast proof of concept printing
• Model printing
• Advanced functional printing
• High speed professional SLA, DLP and LCD workflows

Measured mechanical properties

• Tensile strength: <70 MPa (ISO 527-1 / ISO 527-2)
• Flexural strength: <70 MPa (ISO 178)
• Young’s modulus: MPa (ISO 527)
• Elongation at break: <3-5% (ISO 527)
• Shore hardness: D80 (ISO 868)

Measured physical properties

• Viscosity: <4000 mPas at 25ºC
• Shrinkage: low

Functional performance characteristics

• Super fast and ultra tough
• High flexural and tensile strength
• Monomer free, ultra safe handling
• Biocompatible
• Low shrinkage
• High resolution
• Durable

Processing and handling performance

• Designed to print fast, in less than 4-7 seconds per layer
• Printable by most commercial and professional SLA, DLP & LCD 3D printers
• Increased durability of the resin tank

Chemical and safety characteristics

• Monomer free
• Biocompatible
• Synthetic source
• Organo-tin free

Testing & processing disclaimer

Final print speed, mechanical performance, dimensional accuracy and surface quality depend on printer type, exposure settings, layer thickness, part geometry and post-processing conditions, and must be validated by the user according to the intended application.

Disclaimer

This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

Document reference: TDS-3DRESYN-SFUT-MF-SUPER-FAST-ULTRA-TOUGH-MONOMER-FREE-EN | Version: 1.0 | Last updated: March 2026