3D-ADD NY1 Bio, non yellowing Bio based and Biocompatible additive

Product description

3D-ADD NY1 Bio is a non yellowing bio based and biocompatible additive for reducing the yellowing of clear or yellowish 3Dresyns.

It reduces yellowing significantly of 3Dresyns without affecting their print speed. It is supplied in two versions with different bio content and safety profile.

Application framework

Designed for reducing the yellowing of clear or yellowish 3Dresyns without affecting print speed.

Typical applications

• Reducing yellowing of clear or yellowish 3Dresyns

Measured physical properties

• Recommended dosage: 1-5%, in successive steps of 1% by weight on top of resin solids
• Excessive dosage will create a light bluish tinge of the printed resin
• Available in a 100% Safe Biocompatible UV light protective bio based version
• Available in a 65% Bio content bio based version

Functional performance characteristics

• Reduces yellowing significantly of any 3Dresyns
• Does not affect print speed
• UV light protective additive

Processing and handling performance

• Recommended dosage is 1-5%, in successive steps of 1% by weight on top of resin solids
• Add 1, 2, 3, 4 and 5% of 3D-ADD NY1 Bio to a small quantity of the resin (eg 10 grams) in clear plastic cups
• Cure the resins with different % of 3D-ADD NY1 Bio in the light box for 1 hour
• Afterwards, choose the level of clarity/non yellowing as you wish and use the corresponding % of 3D-ADD NY1 Bio for printing
• It is supplied as a kit, which contains the product, one graduated beaker and one empty 250 mL black bottle to measure, mix, keep and protect the 3D resins from daylight
• Please do not expose any 3D resins to natural or room light to prevent their curing

Chemical and safety characteristics

• Non Yellowing Bio based and Biocompatible additive
• 100% Safe Biocompatible UV light protective bio based additive with a Material Safety Data Sheet "MSDS" free of hazards and pictograms
• 65% Bio content bio based additive with a Material Safety Data Sheet "MSDS" with skin and eye irritancy hazards and pictograms (still biocompatible after curing and post processing)

Testing & processing disclaimer

Excessive dosage will create a light bluish tinge of the printed resin.

Disclaimer

This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

Document reference: TDS-3D-ADD-NY1-BIO-EN | Version: 1.0 | Last updated: March 2026