3Dresyn Bio Bamboo, bio based resin with 88% Bio content

Product description

3Dresyn Bio Bamboo is a bio-based photopolymer formulation developed for environmentally conscious SLA, DLP and LCD 3D printing workflows. The material incorporates approximately 88% total bio-based content derived from renewable sources, including bamboo-based and other plant-derived constituents functionalized for photopolymerization.

This material is designed to support sustainable additive manufacturing practices while maintaining high resolution and reliable mechanical performance. Under appropriate conditions, the material can undergo partial biological degradation into simpler substances through enzymatic activity.

Application framework

Designed for use in vat photopolymerization systems (SLA, DLP and LCD) within professional, educational and laboratory environments for prototyping, model fabrication and applications where reduced environmental impact is desired.

Typical applications

• Eco-conscious prototypes and models
• Conceptual design and validation parts
• Educational applications for SLA technology and material science
• General-purpose models requiring high resolution and surface quality

Measured mechanical properties

• Tensile strength: <50 MPa (ISO 527-1 / ISO 527-2)
• Flexural strength: <50 MPa (ISO 178)
• Young’s modulus: 1000–1600 MPa (ISO 527)
• Elongation at break: <10% (ISO 527)
• Shore hardness: D60–70 (ISO 868)

Measured physical properties

• Bio-based content: ~88% from renewable sources
• Viscosity: <5000 mPa·s at 25 °C
• Shrinkage: very low (typical)
• Resolution capability: very high (process-dependent)
• Flow behavior: excellent flow characteristics

Functional performance characteristics

• Hard material with minor flexibility
• High resolution and surface detail reproduction
• Balanced mechanical performance for conceptual applications
• Supports sustainable material sourcing strategies

Processing and handling performance

• Printing technologies: SLA, DLP and LCD
• Wavelength compatibility: 200–410 nm
• Curing behavior: medium depending on formulation tuning
• Typical curing: 10–15 seconds at 100 µm (with FT1 tuning)
• Typical curing: 15–25 seconds at 100 µm (with FT5 Bio HP tuning)
• Compatible with most commercial and professional systems

Chemical and safety characteristics

• BPA-free formulation
• Transition metal-free formulation
• Organo-tin free formulation
• EN 71-3:2019 compliant (reference framework)

Testing & processing disclaimer

Material properties are measured under controlled laboratory conditions and may vary depending on printer type, wavelength, formulation tuning, layer thickness, build orientation and post-processing conditions. Performance must be validated by the user under the intended workflow conditions.

Disclaimer

This material is supplied as a professional manufacturing material for prototyping and model fabrication workflows. It is not marketed as a finished medical device. The regulatory classification and compliance of any final part manufactured using this material remain the responsibility of the user or legal manufacturer according to the intended application and applicable regulations.

Document reference: TDS-BIO-BAMBOO-EN | Version: 1.0 | Last updated: March 2026