3Dresyn CDP has these features and benefits:
- excellent dispersability and flow of post added micron and submicron sintering ceramic, metal, polymer, and exotic micron and submicron nano powders
- powder additions can be up to 50% volume concentrations still with good flow
- ideal resin for sintering micron and nano powders
- ideal resin with excellent wetting of micron and nano powders for sintering systems
- very high resolution 3D printing for very high detail and resolution applications
- high print quality and speed with curing wavelengths up to 410 nm and higher upon request
- controlled and reproducible process shrinkage
- minimum expansion coefficient and wide temperature interval of debinding to prevent micro-fractures
- elongation <5%
- relative low viscosity, good flow
- very high resolution of 20 microns of final products
- low shrinkage
- printable by SLA DLP 3D printers
- increased durability of the resin tank
- organo-tin free
- biocompatible without any toxic ingredients
- used in combination with our Adhesive Primer 3Dresyn AP1 for promoting adhesion on the build platform when high powder loads are used
Debinding process:
- Insert flask in the preheated oven at 150-200ºC
- Ramp 1-2ºC/ minute up to 550ºC
- Hold at 550ºC for 30 minutes
- Ramp 1-2ºC/ minute up to sintering temperature of your chosen powder
- Hold at sintering temperature for 120 minutes
- Ramp 1-2ºC/ minute down to 640ºC
