3Dresyn IM-UHT-WS has these features and benefits:
- recommended for printing Water Soluble WS sacrificial Injection Molds IM for injection of low and medium injection pressure & temperature materials, plastics, ceramics CIM and metals MIM
- Shore Hardness D80
- Heat Deflection Temperature HDT>100ºC@0.45MPa
- supplied in clear and cyan, magenta, yellow, black and white colors
- cyan, magenta, yellow and especially black provide higher resolution than clear and white
- fast solubility in water
- tack free finishes after light box postcuring
- tensile and flexural strength <40 MPa
- high rigidity (Young modulus >2000 MPa) to permit printing of thin rigid mold walls to maximise solubility speed and minimum resin consumption
- non brittle at injection temperatures
- elongation <3%
- very low viscosity, below 100 cps
- high resolution once tuned to the printer specifications and after full workflow implementation
- very low shrinkage
- printable by most commercial and professional SLA, DLP & LCD 3D printers
- improved water solubility is achieved with low light power printers, such as standard LCD printers
- fast printability with even low power LCD printers
- increased durability of the resin tank
- metal and organo-tin free
- clean and postcure your 3D prints with Cleaning Fluid WS1 Bio
- level of printing difficulty: medium
Note: soluble materials may swell instead of dissolve in some printing settings, especially when they are cured at high relative power such as with high power laser and DLP printers
