3Dresyn LA1 Liquid Amber is our natural amber-filled 3D resin with amber-like satin finish for direct 3D printing of ambe-like jewelry
Features & benefits
-
natural amber based 3D resin for direct 3D printing of amber-look jewelry
-
designed for very high detail amber-like color finishes with very low shrinkage
-
ultra hard & tough (UHT) balance for wearable parts
-
natural amber color with high amber content
-
high tensile and flexural strength
-
durable: good scratch and wear resistance
-
very high resolution
-
printable by most commercial and professional SLA, DLP & LCD 3D printers
-
formulated for increased durability of the resin tank
Typical applications
-
rings, pendants, earrings, bracelets, charms, beads
-
fashion hardware and decorative components
Typical physical & mechanical properties
-
color/appearance: natural amber
-
Hardness: Shore D 85–90
-
Tensile strength: <50 MPa
-
Flexural strength: <50 MPa
-
Young’s modulus: 3500–4500 MPa
-
Elongation at break: <2%
-
Shrinkage: very low
-
Resolution: very high
Values are indicative and depend on printer, settings, post-processing, geometry, and test conditions.
Printer compatibility
-
SLA, DLP & LCD systems operating at 365–405 nm
-
Layer thickness: 25–100 μm (recommend 50 μm for jewelry detail)
Processing guidelines
-
supports: fine contact points on polishable faces; increase density for heavy parts (higher density composite)
-
cleaning: brief, efficient wash (IPA or our recommended cleaning fluids). Avoid long soaking if IPA is used
-
drying: short rest to allow solvent evaporation
-
finishing: wet sanding & polishing to mirror; matte by light blasting/micro-abrasion
Design & use notes
Safety & handling
- organo-tin free. This product is not certified as a medical device or implant
Storage & shelf life
-
store tightly closed, 15–25 °C, away from light and heat
-
shelf life: typically 12 months
