3Dresyn SE super elastic

Product description

3Dresyn SE is a super elastic photopolymer formulation designed for applications requiring ultra-low stiffness, extreme elongation and very high deformability. The material enables the fabrication of soft components capable of repeated stretching, bending and folding without fracture.

This formulation is optimized for elastomer-like behavior, supporting applications where softness, elasticity and recovery after deformation are critical.

Application framework

Designed for use in vat photopolymerization systems (SLA, DLP and LCD) within professional and industrial environments for super-elastic, soft and highly deformable components.

Typical applications

• Super-elastic flexible components
• Soft wearable and ergonomic parts
• Highly deformable cushioning and damping elements
• Elastomer-like prototypes requiring very high elongation

Measured mechanical properties

• Tensile strength: <2 MPa (ISO 527-1 / ISO 527-2)
• Flexural strength: <1.5 MPa (ISO 178)
• Young’s modulus: <2 MPa (ISO 527)
• Elongation at break: >300% (ISO 527)
• Shore hardness: A10 (ISO 868)

Measured physical properties

• Viscosity: <50 mPa·s at 25 °C (very low viscosity)
• Shrinkage: <1% (typical)
• Resolution capability: very high (process-dependent)

Functional performance characteristics

• Super-elastic material behavior
• 100% foldability without breaking
• Very high elongation and deformation capability
• Soft touch and excellent flexibility
• Durable under repeated mechanical stress

Processing and handling performance

• Printing technologies: SLA, DLP and LCD
• Compatible with most commercial and professional systems when properly calibrated
• Very low viscosity enabling excellent flow and recoating

Chemical and safety characteristics

• Organo-tin free formulation
• BPA-free formulation
• Transition metal-free formulation

Testing & processing disclaimer

Material properties are measured under controlled laboratory conditions and may vary depending on printer type, exposure conditions, layer thickness, build orientation and post-processing workflow.

Disclaimer

This material is supplied as a professional manufacturing material for engineering and prototyping workflows. It is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

Document reference: TDS-SE-EN | Version: 1.0 | Last updated: March 2026