3Dresyn IM-E, durable and elastic for injection of soft materials

Product description

3Dresyn® IM-E is an elastic photopolymer developed for the fabrication of ultra-soft and highly deformable components requiring maximum flexibility and high elongation.

Application framework

Designed for use in vat photopolymerization systems (SLA, DLP and LCD) within controlled professional environments. Suitable for applications requiring elastic materials capable of large deformation and recovery without fracture.

Typical applications

• Elastic and soft functional components
• Highly deformable structures
• Flexible seals and soft interfaces
• Soft tooling and auxiliary elements
• Applications requiring extreme elongation and low stiffness

Measured mechanical properties

• Shore hardness: A20 (ISO 868)
• Tensile strength: <2 MPa (ISO 527)
• Flexural strength: <1.5 MPa (ISO 178)
• Young’s modulus: <2 MPa (ISO 527)
• Elongation: >90% (ISO 527)
• Very low viscosity: <50 mPa·s (Brookfield)
• Very low shrinkage (internal method)

Functional performance characteristics

• Elastic behavior
• 100% foldable without breaking
• Durable under repeated deformation
• Very high resolution
• Very low shrinkage

Processing and handling performance

• Printable by most commercial and professional SLA, DLP and LCD 3D printers

Testing & processing disclaimer

Material performance depends on printer type, exposure conditions, geometry and full workflow implementation. Mechanical performance must be validated by the user for each specific application.

Why choose 3Dresyn® IM-E

• Ultra-soft elastic material with very high elongation
• Extreme flexibility without fracture
• Very low viscosity enabling high detail printing
• Very low shrinkage and stable processing
• Compatible with SLA, DLP and LCD technologies

Regulatory & legal notice

This material is supplied as a professional manufacturing material and is not marketed as a finished product. Final performance and process validation remain the responsibility of the user depending on printer, geometry and workflow conditions.

Document reference: TDS-IM-E-EN | Version: 1.0 | Last updated: March 2026