3Dresyn CD Low-Cost Conceptual Design Prototyping Resin

Product description

3Dresyn CD is a Conceptual Design 3D printing resin developed for fast, reliable and cost-effective professional proof-of-concept and model fabrication. It is engineered to deliver good print definition and sufficient mechanical performance for early-stage validation of geometry and visual assessment.

Application framework

Designed for use in vat photopolymerization systems (SLA, DLP and LCD) within professional environments for conceptual validation workflows.

Typical applications

• Conceptual design models and proof-of-concept parts
• Dental models for thermoforming workflows (indirect use)
• Prototyping and design validation
• General-purpose visual models

Measured mechanical properties

• Tensile strength: 20–30 MPa (ISO 527-1 / ISO 527-2)
• Flexural strength: 20–30 MPa (ISO 178)
• Young’s modulus: 1200–1600 MPa (ISO 527)
• Elongation at break: <5% (ISO 527)
• Shore hardness: D70 (ISO 868)

Functional performance characteristics

• Fast curing for high-throughput printing
• Moderate rigidity with minor flexibility
• Good dimensional accuracy for visual validation
• Optimized for iterative workflows

Processing and handling performance

• Printing technologies: SLA, DLP and LCD
• Fast curing: <5–7 seconds per layer (50 µm)
• Low viscosity (<200 mPa·s)
• Printable on most commercial systems
• Increased durability of the resin tank
• Organo-tin free

Testing & processing disclaimer

Material properties are measured under controlled conditions and may vary depending on equipment and processing parameters.

Disclaimer

This material is supplied for professional prototyping and model fabrication. It is not marketed as a medical device.