Thinner 3Dresyn E MF Bio, Bio based and Biocompatible Monomer Free Elastic reactive diluent

Product description

Thinner 3Dresyn E MF Bio is a bio-based and biocompatible Monomer Free Elastic reactive diluent with low deflection temperature.

Thinner 3Dresyn E MF Bio has low viscosity and excellent viscosity reduction while imparting elasticity and 100% foldability without breaking in compatible 3D resin systems.

Application framework

Designed for use as a bio-based and biocompatible monomer free elastic reactive diluent in compatible SLA, DLP & LCD 3D resin systems, once combined with more rigid resins.

Typical applications

• Reducing viscosity of compatible 3D resin systems
• Formulating elastic 3D resin systems once combined with more rigid resins

Measured mechanical properties

• Tensile strength: <2 MPa (ISO 527-1 / ISO 527-2)
• Young’s modulus: <50 MPa (ISO 527)
• Elongation at break: >>100% (ISO 527)
• Shore hardness: A50 (ISO 868)

Measured physical properties

• Low deflection temperature (ISO 75)
• Viscosity: <600 mPas at 23°C ± 2°C (ISO 3219)
• Very low shrinkage

Functional performance characteristics

• Imparts elasticity and 100% foldability without breaking
• Durable

Processing and handling performance

• Printable by most commercial and professional SLA, DLP & LCD 3D printers once combined with more rigid resins

Chemical and safety characteristics

• Bio based resin source: >60% bio content
• Ultra safe and biocompatible
• Monomer Free MF
• The use of gloves and goggles is required for safe handlling
• Avoid always contact with skin and eyes by using gloves and goggles
• Thinner 3Dresyn E MF Bio has been formulated to be safe for final users once any unreacted resin, residual and by-products are removed and cleaned from the prints.

Testing & processing disclaimer

Thinner 3Dresyn E MF Bio has been formulated to be safe for final users once any unreacted resin, residual and by-products are removed and cleaned from the prints.

Disclaimer

This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

Document reference: TDS-THINNER-3DRESYN-E-MF-BIO-EN | Version: 1.0 | Last updated: March 2026