3Dputty HDT-WS is our light curing Water Soluble sacrificial high Heat Deflection Temperature putty curable with UV & visible light in seconds.
Its usage is ideal as water soluble sacrificial demolding filler for filling the gap between water soluble sacrificial 3D printed molds and the injector flasks.
It is a fast light curing putty which before exposed to UV/Visible light can be modelled by hand or with a spatula, but after being shaped or modelled it can be hardened with a normal UV/Visible light in seconds to become a water soluble sacrificial high HDT filler for easy demolding.
3Dputty HDT-WS has these features:
- clear/translucent non-sticky putty
- soft, malleable, easy to shape with a spatula or by hand* for easy application before curing
- fast curing of even thick layers of several centimetres
- sacrificial ultra hard and rigid after light curing
- high deflection temperature up to 290C @0.45MPa
- Ultra Hard and Rigid (UHR)
- very high rigidity (Young modulus >3000 MPa)
- synthetic resin source
- high tensile and flexural strength <40 MPa
- fast solubility in water
- elongation <2%
- photocurable with UV & Visible light
- long shelf life
- clean and postcure your 3D prints with Cleaning Fluid WS1 Bio
*Note: use gloves to prevent skin irritation and other hazards (read the MSDS before handling it)
