Cleaning Fluid WS1 Bio is a bio based and biocompatible cleaning fluid developed to clean water soluble or swellable 3D prints and remove and wash off easily any residues from their surface. Its usage is ideal for ultra safe cleaning of water soluble sacrifical 3D printed materials used for making water soluble resin systems, such as sacrificial injection molds.
Cleaning Fluid WS1 Bio has these features and benefits:
- excellent washing off and overall cleaning properties of water and non water soluble 3D prints*, including thermosets and thermoplastics such as TPU, polyamides (nylon), etc...
- very low viscosity <10 cps at 25ºC
- It has been formulated to clean water soluble or swellable resins efficiently
- IFU for water soluble sacrificial 3D printed resins
*Note: for smoothing prints use Cleaning fluid WS1 (non Bio version). For cleaning non water soluble or swellable durable 3D resins use our ultra safe and biocompatible Cleaning Fluid Bio, Cleaning Fluid NW1 Bio, or Cleaning Fluid UNW1 Bio if your prints are prone to suffer whitening.
How to reuse dirty Cleaning Fluid? Expose the Cleaning Fluid in the washing container to sunlight, or with or without stirring to light in the light box or curing machine. After several minutes the uncured resin will cure as small particles. Then, use a paint filter to separate and remove the cured resin from the recycled cleaning fluid, which can be used again and again for washing prints.
