3Dresyn 2PP Glass-like2 Bio is our Biocompatible Rigid glass-like photocurable resin with High Deflection Temperature for two photon polymerization.
Features and Benefits:
- ideal 2PP biocompatible photocurable resin (negative photoresist) for high precision additive manufacturing of rigid 3D nano & microstructures with high deflection temperature
- excellent balance of resolution (shape accuracy) and writing speed
- photoreactive from 200 to 410 nm with Fine Tuner 2PP FT8 Bio (single 1 photon absorption)
- photoreactive from 600 to 810 nm with Fine Tuner 2PP FT8 Bio (two photon absorption)
- 100% optically transparent from 440 nm onwards into the Near Infrared NIR
- achievable feature sizes of 100-200 nm
-
designed for Dip-in two-photon lithography DTPL (also referred as Dip-in Laser Lithography DiLL) where the 2PP resin is immersed upside down in the microcope objective
- designed for conventional 2PP systems (also refered as Two Photon Lithography TPL) where the 2PP resin is positioned upright on the substrate
- ultra rigid
- easy handling by direct drop casting
- biocompatible
- good adhesion on glass and other substrates
-
safe and biocompatible, compliant with the Quality requirements of FDA, ISO 20795, 13485 & 10993
- synthetic
- very low water absorption: <15 µg/mm3
-
water solubility: ≤ 1,6 µg/mm3
- hydrophobic
- Shore hardness D90
- clear, non yellowing
- tensile strength, <40 MPa
- flexural strength < 40 MPa
- ultra rigid (Young modulus 3000-4000 MPa)
- high deflection temperature >200ºC
- elongation <1%
- durable
- low shrinkage <9%
- organo-tin free
- printable by most commercial two photon polymerization printers with wavelengths from 600 nm to 800 nm
- supplied at different writing speeds: fast, intermediate, slow, and non reactive for custom control of writing speed and resolution
- supplied in a relatively low and high viscosity version
- choose a LV low viscosity version (<1000 mPas) for easy development or cleaning of uncured resin with conventional 2PP upright configurations
- choose a HV high viscosity version (>2000 mPas) for upside down DiLL configurations
- easy removal of uncured resin with conventional developers such isopropanol IPA and propylene glycol methyl ether acetate (PGMEA)
- ideally use our biocompatible Cleaning Fluid UNW1 Bio to preserve transparency, prevent whitening and chemical attack of IPA and conventional alcohols
Discover and request our Instructions for Use IFU after ordering. Contact us to consult about our 3Dresyns for 2PP and your specific performance goals at: info@3Dresyns.com
