Cleaners

Choose your cleaning route

Use the routes below to navigate the collection by type of print and clarity level.

• Effective resin removal during post-processing.
• Improved surface quality after washing.
• More consistent curing outcomes.
• Workflow-compatible cleaning options for different resin types and equipment.

Typical use scenarios across the collection

These products support consistent post-processing across professional printing workflows.

• Cleaning printed parts after SLA, DLP and LCD/MSLA printing.
• Production post-processing workflows.
• Surface residue reduction.
• Preparation before post-curing.
• Consistent finishing for industrial and dental use cases.

How to choose the right cleaner

Select the most suitable product according to what you are cleaning, the clarity you need and its safety positioning.

• Need the highest gloss & transparency on durable prints (no whitening) → UNW1 Bio or UNW2 Bio
• Also need thermal post-curing up to 100 ºC → UNW2 Bio or NW1 Bio
• Need medium clarity → NW1 Bio
• Need a basic biocompatible wash (lower clarity) → Bio
• Washing, smoothing or post-curing sacrificial prints (water-soluble & non-water-soluble) → WS1 Bio (preferred) or WS2 Bio; WS1 for smoothing (non-biocompatible)
• Dissolving solvent-soluble printed materials → SS1 Bio, or SS1F for faster dissolving

Ultra non-whitening cleaners

For washing and light post-curing of durable prints with the highest gloss and transparency, without haziness or whitening.

• Ultra non-whitening, high clarity (gloss & transparency); no risks.
• UNW1 Bio: balsamic fragrance, very low viscosity (<10 cps at 25 ºC).
• UNW2 Bio: odorless, medium viscosity (<160 cps at 25 ºC); supports thermal post-curing up to 100 ºC (or higher).

Non-whitening cleaner

For washing and light or thermal post-curing of durable prints where medium clarity is acceptable.

• Non-whitening, medium clarity (less than UNW1 Bio and UNW2 Bio); no risks.
• Odorless, low viscosity (<50 mPas at 25 ºC).
• Supports light and thermal post-curing up to 100 ºC (or higher).

Basic biocompatible cleaner

For washing and light post-curing of durable prints at room temperature where clarity is not the priority.

• Odorless biocompatible cleaner; low clarity (less than UNW1 Bio, UNW2 Bio and NW1 Bio); no risks.
• Low viscosity (<50 mPas at 25 ºC) with high hydrophilicity and polarity.
• Washing and light post-curing of durable prints by dipping at room temperature.

Sacrificial-print cleaners (water-soluble & non-water-soluble)

For washing, smoothing and post-curing of sacrificial prints — both water-soluble and non-water-soluble.

• WS1 Bio: bio-based & biocompatible, very low viscosity (<10 mPas at 25 ºC); washing and post-curing of water-soluble or swellable prints (preferred).
• WS2 Bio: odorless biocompatible, high hydrophobicity; second alternative for post-curing water-soluble sacrificial prints.
• WS1: non-biocompatible, ultra low viscosity (<1 mPas at 20 ºC); cleaning & surface smoothing of water-soluble and non-water-soluble prints — has risks, handle with care.

Solvent solutions

For dissolving solvent-soluble 3D printed materials.

• SS1 Bio: biocompatible solvent solution for dissolving solvent-soluble 3D printed materials.
• SS1F: faster-dissolving solvent solution for solvent-soluble 3D printed materials.

Cleaners for durable prints, sacrificial prints and solvent-soluble materials

This collection covers three main needs: clarity-controlled washing of durable prints, washing/smoothing/post-curing of sacrificial prints, and dissolving of solvent-soluble printed materials.

• UNW1 Bio and UNW2 Bio cover the highest-clarity, ultra non-whitening route.
• NW1 Bio covers medium clarity; Bio covers basic biocompatible washing.
• WS1 Bio, WS2 Bio and WS1 cover sacrificial prints (water-soluble and non-water-soluble).
• SS1 Bio and SS1F cover solvent solutions for dissolving solvent-soluble materials.

Final results depend on the full washing and post-curing workflow

Cleaning quality, print clarity and curing outcomes depend on the resin, the cleaner, its viscosity, the dipping or immersion method, the temperature and the post-curing step — not on the cleaner alone.

Match the cleaner to your resin, print type and equipment, and follow each product's Instructions for Use, paying attention to the stated safety positioning.

Documentation, technical selection help and workflow support

Use the resources below to move from cleaner preselection to workflow validation and broader technical support.

Select the right cleaner and validate your post-processing workflow

Use the routes above to pick the cleaner by what you are cleaning and the clarity you need, compare the options in the table, and validate the result under your resin, washing method and post-curing process.