Cleaning Fluid WS2 Bio – Hydrophobic Immersion Fluid for Post-Curing Water-Soluble Sacrificial Prints

Cleaning Fluid WS2 Bio is a hydrophobic cleaning fluid developed for post-curing water-soluble sacrificial 3D printed parts by immersion or dipping workflows.

Cleaning Fluid WS2 Bio is designed for immersion post-curing of water-soluble sacrificial 3D prints to support improved surface cure in light-box workflows.

Designed for post-curing water-soluble sacrificial 3D printed parts by immersion or dipping workflows in controlled laboratory and industrial environments.

• Immersion post-curing of water-soluble sacrificial 3D printed parts
• Dipping workflows for water-soluble sacrificial 3D prints
• Supporting improved surface cure in light-box workflows

• Viscosity: <20 mPas at 23°C ± 2°C (ISO 3219)

• Designed for immersion post-curing of water-soluble sacrificial 3D prints to support improved surface cure in light-box workflows
• Does not typically attack printed parts, plastics or painted printer components (resin tanks, covers)

• Suitable for controlled laboratory and industrial environments
• Not recommended for primary resin washing, as it is not miscible with most liquid 3D photopolymer resins

• Hydrophobic
• Odorless
• Low volatility
• Non-flammable under normal handling conditions

This product is supplied as a professional processing aid and is not marketed as a finished medical device. Final performance and suitability must be validated by the user according to the intended application.

Use these related 3Dresyns pages to navigate adjacent material and process routes within the same technical workflow.

• Cleaners
• Processing Auxiliaries

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)