3Dresyn VAM FA60 Bio, Biocompatible flexible resin with Shore A60 printable by VAM 3D printers

Product description

3Dresyn VAM FA60 Bio is a flexible photopolymer for VAM 3D printers.

This material is designed to be flexible without breaking, providing properties similar to flexible rubber for high resolution VAM printing workflows.

Application framework

Designed for use in VAM 3D printers for fabrication of flexible parts requiring high impact resistance, very high resolution and very low shrinkage.

Typical applications

• Flexible printed parts
• VAM printed parts with properties similar to flexible rubber
• High resolution flexible VAM printing applications

Measured mechanical properties

• Tensile strength: <15 MPa (ISO 527-1 / ISO 527-2)
• Flexural strength: <15 MPa (ISO 178)
• Young’s modulus: <10 MPa (ISO 527)
• Elongation at break: >100% (ISO 527)
• Shore hardness: A60 (ISO 868)

Measured physical properties

• Viscosity: >60.000 mPas at 23°C ± 2°C (ISO 3219)
• Density: 1.0-1.1 g/cc at 25ºC (ISO 1183)
• Refractive index: 1.47-1.49
• Shrinkage: very low

Functional performance characteristics

• Flexible without breaking
• 100% biocompatible
• Ultra safe and toxic pictograms free
• Ultra non yellowing
• High impact and shattering resistance
• Properties similar to flexible rubber
• Durable
• Very high resolution

Processing and handling performance

• High viscous resin with very low flow at room temperature
• Printable by VAM 3D printers
• Addition of a suitable photo accelerant and resolution-er system is required for printing in specific VAM printers
  

Chemical and safety characteristics

• 100% biocompatible
• Ultra safe and toxic pictograms free
• Synthetic resin source
• Ultra low organo-tin content
• Ultra non yellowing

Testing & processing disclaimer

Final flexibility, printability and mechanical performance must be validated by the user according to the intended application, printer configuration and processing conditions.

Disclaimer

This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

Document reference: TDS-3DRESYN-VAM-FA60-BIO-EN | Version: 1.0 | Last updated: March 2026