3Dresyn Acetal POM-Like vs Engineering Resins

Mechanical Resistance Comparison & Executive Summary

3Dresyn Acetal POM-like is a rigid engineering photopolymer designed for parts requiring high dimensional stability, relatively high stiffness, low deformation and precise functional behaviour. It is positioned for technical components where a more structural and stable response is required than in softer tough resins or low-modulus PP-like and PE-like materials.

With flexural strength below 80–90 MPa, Young’s modulus of 2.5–3.0 GPa, elongation below 25% and Shore D 80–85, Acetal POM-like occupies an important space between general engineering resins and very high-strength rigid materials. It provides a more precise and rigid functional profile while maintaining practical processability in open 385–405 nm systems.

Choose Acetal POM-like when the goal is not maximum toughness or maximum heat resistance, but a more precise, rigid and dimensionally stable engineering behaviour for functional parts and mechanisms.

Data Table — Typical Properties (post-cure; internal data and competitor TDS)

Resin	Flexural strength	Elongation	Young’s modulus	Noted traits
3Dresyn Acetal POM-like	<80–90 MPa	<25%	2.5–3.0 GPa	Rigid, precise engineering behaviour; Shore D 80–85; Tg >90 °C; open 385–405 nm.
Formlabs Grey Pro	~121 MPa / depends on strain definition	Low-to-moderate	~2.2 GPa class	Closed ecosystem; rigid engineering profile; general-purpose dimensional parts.
Formlabs Rigid 10K	126–158 MPa	Very low	Very high	Closed ecosystem; ultra-stiff, more brittle; composite-like response.
Liqcreate Strong-X	~134–135 MPa	Low	High stiffness	Open systems; strength-focused; less centered on dimensional precision balance.
Forward AM rigid engineering families	Varies	Varies	Medium-to-high	Engineering rigid families; performance depends strongly on ecosystem and post-cure.
Loctite rigid engineering families	Varies	Varies	Varies	Application-specific positioning; some grades prioritize heat or rigidity over practical balanced use.

Mobile: scroll horizontally to view all columns. The first column remains visible while scrolling.

Comparability note: Mechanical data across suppliers are often reported under different post-curing conditions and with different strain definitions. Dimensional-performance claims should also be interpreted in the context of actual printer, geometry and process control.

Where 3Dresyn Acetal POM-like Wins

1) More precise and rigid engineering behaviour

Acetal POM-like is designed for users who need a more stable and structural engineering response than softer tough or PP-like materials can provide.
Its higher modulus and lower deformation support dimensional consistency in functional parts and mechanisms.

2) Strong balance between stiffness and controlled ductility

It is not an ultra-brittle rigid composite, but a more usable engineering resin positioned for real technical applications where some controlled deformation is acceptable while rigidity remains the priority.

3) Thermal and dimensional stability

With Tg above 90 °C, Acetal POM-like occupies a stronger thermal position than many general engineering and tough resins.

4) Open-system processing

Compatible with open 385–405 nm SLA, DLP and LCD systems, allowing broader implementation flexibility than closed rigid ecosystems.

Application Guidance

Choose 3Dresyn Acetal POM-like for: rigid technical components, precise housings, structural inserts, dimensional fixtures, mechanism components and engineering parts requiring stability and controlled deformation.
Choose a tougher resin if impact resistance and ductility dominate the application.
Choose a stronger high-end rigid resin if maximum flexural strength is the only priority and brittleness can be tolerated.

Processing Notes (Quick Start)

Compatible with open SLA, DLP and LCD systems in the 385–405 nm range.
Use calibrated exposure and validated post-cure to achieve target dimensional and mechanical performance.
Recommended for applications where process stability matters more than single headline values.

Normalization & Caveats

POM-like positioning should be interpreted as engineering behaviour analogy, not direct equivalence to molded acetal.
Dimensional performance depends on curing control, build orientation and post-processing.
Values should be compared only after normalizing testing and post-cure conditions.

References

3Dresyn Acetal POM-like internal product data
Formlabs Grey Pro TDS
Formlabs Rigid 10K TDS
Liqcreate Strong-X TDS
Relevant Forward AM and Loctite engineering documentation