INI INTEGER without annotations for copy & paste

INI INTEGER:

[General]

Name = "xxxxxx";

Heater Temperature = 30; ° C

Heater Enable = true; true / false

 

; _________ MAX_START___________

 

[: / MAX-Platform / General]

Printer Classes = ["MAX UV385"]

Slice Thickness Presets = [0.05]

Slice Thickness = 0.05

 

[: / MAX-Platform / Mechanics]

Separation Distance = 10; mm

Separation Velocity = 2.475; mm / s

Separation Acceleration = 0.5;

Approach Velocity = 4.3; mm / s

Separation Detect Window = 10;

Separation Detect Window Time = 0.250

Separation Detect Hard Stop = 1

Traverse Timeout Range = 150

Motor Timeout = 150

Separation Pressure Limit = 300

 

[: / MAX-Platform / Curing]

Light Intensity Control = 1

Light Intensity = 8.0

 

; Max (385 nm), 8.0 mW / cm²

 

Z = [16.6, 0.020]

Z = [20, 0.030]

Z = [23.3, 0.040]

Z = [26.6667, 0.050]

Z = [30, 0.060]

Z = [33.3, 0.070]

 

Offset = 0.0

Burn-In Layers = 4

Burn-In Exposure = 0.5

Burn-In Exposure Time = 50.0

XY Scale = 1.00

Support Exposure = 200

 

[: / MAX-Platform / Delays]

Burn-In Wait Time (After Exposure) = 0;

Burn-In Wait Time (After Separation) = 0;

Burn-In Wait Time (After Approach) = 0;

Normal Wait Time (After Exposure) = 0;

Normal Wait Time (After Separation) = 0;

Normal Wait Time (After Approach) = 0;

 

[Support]

Leveling = true

Leveling Height = 2.0

Tallest = false

Tallest Height = 0.0

Slope = 35

Side Feature = 2.0

Spacing = 2.0

Strength = 10

Torsion = 0

Intersupport = true