3Dresyn HA2 LV Bio, Biocompatible and Bio based Rigidity and Hardness Adjuster with low viscosity for detailed rigidity adjustment

3Dresyn HA2 LV Bio is a low viscosity biocompatible and bio based rigidity adjuster for detailed rigidity refinement of 3Dresyns.

3Dresyn HA2 LV Bio is normally used up to 5-15% dosage, or more depending on printer and rigidity specifications for certain thickness, and it is used for adjusting the rigidity and hardness of 3Dresyns with Shore below or above D70 to your personal choice.

Designed for use in compatible SLA, DLP & LCD 3D resin systems as a rigidity and hardness adjuster.

• Adjusting the rigidity and hardness of 3Dresyns with Shore below or above D70
• Detailed rigidity refinement of compatible 3Dresyns

• Tensile strength: <20 MPa (ISO 527-1 / ISO 527-2)
• Flexural strength: <20 MPa (ISO 178)
• Young’s modulus: c. 1000 MPa (ISO 527)
• Elongation at break: <5% (ISO 527)
• Shore hardness: D70 (ISO 868)

• Density: 0.90–1.20 g/cm³, depending on formulation and, where applicable, selected version (ISO 1675)
• Shrinkage: very low
• Viscosity: <10 mPas at 23°C ± 2°C (ISO 3219)
• Clear

• Rigid
• Ideal for adjusting the rigidity and hardness of 3Dresyns with Shore below or above D70
• Durable
• Very high resolution
• Increased durability of the resin tank

• Normally used up to 5-15% dosage, or more depending on printer and rigidity specifications for certain thickness
• Printable by most commercial and professional SLA, DLP & LCD 3D printers
• Please do not expose any 3D resins to direct natural or artificial room light to prevent curing.

• Bio based resin source
• Biocompatible
• Organo-tin free
• Hydrophobic
• Fully compliant with the Quality requirements of ISO 20795-1 and ISO 10993-1

This material is supplied as a professional manufacturing material and is not marketed as a finished medical device. Final part performance and suitability must be validated by the user according to the intended application.

This technical datasheet should be used together with the relevant processing, calibration, safety and workflow documentation available in the 3Dresyns® Resources section.

Access the 3Dresyns® Technical Resources (IFU, calibration, CRT, post-processing and troubleshooting)